fprintd (1.94.5-2) unstable; urgency=medium
* debian/patches: Translation updates
Also synchronize the potfile with upstream changes
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Wed, 02 Apr 2025 13:50:18 +0200
fprintd (1.94.5-1) unstable; urgency=medium
* New upstream release
* debian/control: Bump build dependency on libfprint 1.94.9
* debian/patches: Drop, applied upstream
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 20 Feb 2025 21:50:08 +0100
fprintd (1.94.4-1) unstable; urgency=medium
* New upstream release
* debian/watch: Update to work with newer gitlab
Dropped support for old versions syntax, but it's not something we use for
* debian/control: Bump build dependency on GLib 2.64
* d/p: Add upstream patches to fix PAM tests timeouts
* debian/rules: Do not ignore PAM tests
* debian/fprintd.postinst: Drop, it's unneeded
* debian/control: Update Standards Version to 4.7.0 (no change required)
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 05 Sep 2024 04:36:53 +0200
fprintd (1.94.3-1) unstable; urgency=medium
[ Marco Trevisan (Treviño) ]
* New upstream release (LP: #2060067, Closes: #1064813)
* debian/patches: Drop, all applied upstream
[ Michael Biebl ]
* Install PAM module in /usr (Closes: #1061580)
* Install systemd unit in /usr (Closes: #1061580)
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 04 Apr 2024 03:58:13 +0200
fprintd (1.94.2-3) unstable; urgency=medium
* debian/control: depend on polkitd instead of policykit-1
fprintd requires polkitd but it uses it via dbus. (Closes: #1025558)
* debian/rules: Skip pam tests as they are timeouting in debian.
This is a build failure that we've in debian but not upstream, so while
we figure out what it is, it's better to just skip the tests to unblock
fprintd to land.
* debian/patches: Cherry pick upstream fixes
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Sat, 23 Dec 2023 04:28:38 +0100
fprintd (1.94.2-2) unstable; urgency=medium
* debian/patches: Cherry-pick upstream fixes
- Avoid to warn when not needed
- Fix dbusmock AddDevice calls to include optional argument
(Closes: #1009395)
- Translation updates
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Tue, 07 Jun 2022 20:05:39 +0200
fprintd (1.94.2-1) unstable; urgency=medium
* New upstream release:
- Add PAM module options to ignore timeout/retry limits
- A lot of translation updates after the POT file was fixed
- Improve meson build file and fix building with meson 0.61.0
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Fri, 25 Feb 2022 01:44:22 +0100
fprintd (1.94.1-1) unstable; urgency=medium
* New upstream release
* debian/patches: Drop, all was applied upstream
* debian/pam-configs/fprintd: Use proper max-tries config name
(Closes: #997667)
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Wed, 03 Nov 2021 17:05:11 +0100
fprintd (1.94.0-1) unstable; urgency=medium
* New upstream release
* debian/control: Build depend on libfprint 1.94
* debian/patches: Fix builds with meson 60
* debian/rules: Just use verbose logging on errors
* debian/patches: Cherry-pick upstream fixes and translation updates
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 28 Oct 2021 15:39:31 +0200
fprintd (1.90.9-1) unstable; urgency=medium
[ Marco Trevisan (Treviño) ]
* New upstream release:
- Fix multiple daemon lockup issues (#97)
- Fix print garbage collection to not delete used prints
- pam: Use the device with the most prints
* debian/control: Mark fprintd-doc as Multi-Arch: foreign
[ Helmut Grohne ]
* Fix nocheck FTFBS: Drop <!nocheck> from non-optional dependencies.
(Closes: #977395)
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 21 Jan 2021 21:29:07 +0100
fprintd (1.90.8-1) unstable; urgency=medium
* New upstream release
- pam: Only listen to NameOwnerChanged after fprintd is known to run
- Place new ObjectManager DBus API at /net/reactivated/Fprint
* debian/patches: Remove all patches, applied upstream or not needed anymore
* debian/control: Depend on systemd 235, but only in linux
* debian/rules: Require systemd and set unit path only on linux
* debian/fprintd.install: Use dh-exec to filter linux-only files
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Mon, 14 Dec 2020 21:32:29 +0100
fprintd (1.90.7-1) unstable; urgency=medium
* New upstream release
- Fix fprintd DBus configuration (Closes: #976990)
- Change details of what requires authorization
- Fix various race conditions in pam_fprintd
- Permit interactive authorization from fprintd utilities
- Do not allow deletion while another operation is ongoing
- pam: Guard strdup calls against NULL pointers
* debian/patches:
- Refresh
- Ignore NameOwnerChanged until fprintd is running
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Fri, 11 Dec 2020 00:03:27 +0100
fprintd (1.90.5-2) unstable; urgency=medium
* debian/patches: Make tests run with actual required libfprint version
* debian/control: Remove test-only dependency on libfprint 1.90.4.
Tests are now working with older libfprint versions too
* debian/control: Add myself to Uploaders
* debian/gbp.conf: Include suggested settings by GNOME team.
Even if fprintd is not part of GNOME I think these settings are good
practice anyways.
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 03 Dec 2020 15:57:19 +0100
fprintd (1.90.5-1) unstable; urgency=medium
* New upstream release:
- Permit building with polkit older than 0.114
- Fix possible issues with PAM test
- Fix incorrect DBus policy
- Fix build so that CFLAGS environment is correctly used
- Skip hotplug test with older libfprint (which times out otherwise)
* debian/patches: Drop patches applied upstream
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Wed, 02 Dec 2020 05:35:33 +0100
fprintd (1.90.4-1) unstable; urgency=medium
* Team upload.
[ Marco Trevisan (Treviño) ]
* New upstream release:
- Use GDBus and async Polkit checks
- Authentication is now required to enroll a new print (LP: #1532264,
Closes: #719004)
- Add support for the libfprint early reporting mechanism
- Proper hotplug support together with libfprint 1.90.4
- Handle STATE_DIRECTORY containing multiple paths
- Various memory fixes (LP: #1888495)
* debian/control:
- Remove build dependency on dbus-glib (Closes: #955893)
- Mark as <!nocheck> the packages required only for testing
- Use debhelper 13
- Bump libfprint-2 dependency on 1.90.4 on test case
* debian/rules:
- remove unneeded override to force --fail-missing (as per dh 13)
- Increase tests timeout multiplier
* debian/patches:
- Refresh
- Define auto-pointers functions if not defined:
Fixes a build failure with debian polkit version.
- Cleanup pam-wrapper temporary dir when running tests
- Fix dbus-policy file to address lintian
- Ensure we generate debug symbols in debian builds
[ Laurent Bigonville ]
* debian/control: Bump Standards-Version to 4.5.1 (no further changes)
-- Laurent Bigonville <bigon@debian.org> Tue, 01 Dec 2020 13:06:59 +0100
fprintd (1.90.1-2) unstable; urgency=low
* Team upload.
* Simplify the installation of the pam-config, do not install one
configuration file per architecture
* debian/NEWS: Add an news entry explaining that the user will have to
re-enroll their fingerprints upon update to 1.90.1.
-- Laurent Bigonville <bigon@debian.org> Sun, 15 Nov 2020 16:22:57 +0100
fprintd (1.90.1-1) experimental; urgency=medium
* Team upload.
* New upstream release
- Switch to meson (Closes: #830015)
- Adjust the build-dependencies
* debian/control: Bump Standards-Version to 4.5.0 (no further changes)
* debian/control: Mark the -doc package with Build-Profiles: <!nodoc> and
move gtk-doc-tools to the B-D-I
-- Laurent Bigonville <bigon@debian.org> Wed, 19 Feb 2020 14:01:10 +0100
fprintd (0.9.0-1) unstable; urgency=medium
* Team upload.
* New upstream release
* Add debian/gbp.conf file
* debian/control: Update the Vcs-* fields, it's now hosted on salsa
* debian/patches/remove_unneeded_systemd_check.patch: Do not check the
version of systemd at build-time, this is not needed
* fprint-doc: Add a symlink in /usr/share/doc and adjust the .doc-base file
to please lintian
* debian/control: Bump Standards-Version to 4.4.1 (no further changes)
* Bump debhelper compatibility to 12, switch to dh_missing
* Install the daemon in /usr/libexec/ now that the policy allows it
-- Laurent Bigonville <bigon@debian.org> Sat, 11 Jan 2020 12:54:27 +0100
# Older entries have been removed from this changelog.
# To read the complete changelog use `apt changelog fprintd`.
Generated by dwww version 1.16 on Sat Oct 3 03:24:49 CEST 2026.