libfprint (1:1.94.9-1) unstable; urgency=medium
* New upstream release
* debian/libfprint-2-2.postinst: Devices triggers updated
* debian/libfprint-2-2.install: Install metainfo data
* debian/control: Replace NSS build dependency with OpenSSL
* debian/control: Add b-d on GLib and Gio gir dev packages
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 20 Feb 2025 19:01:13 +0100
libfprint (1:1.94.8-2) unstable; urgency=medium
* debian/control: Build-Depend on dh-sequence-gir
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Tue, 03 Sep 2024 06:02:52 +0200
libfprint (1:1.94.8-1) unstable; urgency=medium
* New upstream release
* debian/watch: Update
* debian/libfprint-2-2.postinst: Devices triggers updated
* debian/patches: Drop, applied upstream
* debian/control: Update Standards Version (no change required)
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Tue, 03 Sep 2024 05:41:34 +0200
libfprint (1:1.94.7-2) unstable; urgency=medium
* debian/patches: Cherry-pick patches to ignore tests missing dependencies
(Closes: #1059027)
* debian/control: Add build-dependency on gir1.2-{gobject,gio}-2.0-dev
* debian/control: Add gir depends and provides fields to dev package
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Tue, 20 Feb 2024 08:42:26 +0100
libfprint (1:1.94.7-1) unstable; urgency=medium
* New upstream release
* debian/libfprint-2-2.postinst: Devices triggers updated
* debian/patches: Drop, applied upstream
* debian: use udev.pc to place udev rules and hwdb (Closes: #1058843)
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Tue, 20 Feb 2024 06:46:40 +0100
libfprint (1:1.94.6-2) unstable; urgency=medium
* debian/control: Update standards-version to 4.6.2, no change needed
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 24 Aug 2023 09:19:31 +0200
libfprint (1:1.94.6-1) unstable; urgency=medium
* New upstream release
* debian/libfprint-2-2.postinst: Devices triggers updated
* debian/patches: Drop, applied upstream
* debian: Add libfprint-2-tests package
* debian/patches: Use assets from correct paths
* debian/rules: Always force building udev hwdb (Closes: #1024309)
* debian/patches: Remove execution bit from test asset
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Wed, 23 Aug 2023 01:11:51 +0200
libfprint (1:1.94.5-1) unstable; urgency=medium
* New upstream release:
- New driver: fpcmoc, supporting various FPC MOC Fingerprint Sensors
- goodixmoc:
+ New PIDs 0x6014, 0x6094, 0x631C, 0x634C, 0x6384, 0x659A.
+ Support resetting device on firmware failure due to corrupted DB.
- elanmoc: New PIDs 0x0c88, 0x0c8c, 0x0c8d.
- synaptics: New PID 0x0104.
- upektc: New PID 0x2017.
- Fixed various memory leaks
* debian/libfprint-2-2.postinst: Devices triggers updated
* debian/patches: Cherry-pick post-release upstream cleanups
* debian/docs: Update reference to README.md and remove TODO
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Fri, 14 Oct 2022 01:09:06 +0200
libfprint (1:1.94.2-1) unstable; urgency=medium
* New upstream release
* debian/libfprint-2-2.postinst: Devices triggers updated
* debian/libfprint-2-*.install: Use more restrictive rules to reduce ubuntu
delta
* debian/update-udev-triggers: Ignore errors on udevadm trigger.
These are not fatal for package installation and rebuild postinst script
* debian/watch: Use @PACKAGE@
* debian/patches: Drop, all applied upstream
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Wed, 03 Nov 2021 17:39:27 +0100
libfprint (1:1.94.1-1) unstable; urgency=medium
* New upstream release
* debian/libfprint-2-2.postinst: Devices triggers updated
* debian/patches: Remove all patches, they've been applied upstream
* debian/patches: Fix template struct in goodix drivers (LP: #1945296)
* debian/patches: Add support for new elan and goodix PIDs
* debian/libfprint-2-2.postinst: Update to match new PIDs
* debian: Build-depend on gudev-1, and set back rules dir.
This is needed for SPI devices
* debian/patches: Fix test device descriptors to get tests passing
* debian/libfprint-2-2.symbols: Add new symbols
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Wed, 27 Oct 2021 15:17:09 +0200
libfprint (1:1.90.7-3) experimental; urgency=medium
* gbp.conf: Prepare for experimental branching
* debian/patches:
- Use hwdb to store device autosuspend rules and drop debian specifics.
Upstream will use an hwdb to store the device autosuspend (that will be
included in systemd also, so libfprint packagin may stop shipping it at
later point), so use it earlier.
Drop the debian specific rules to set the devices part of the `plugdev`
group as such devices should not be ever readable by an user, but the
access should be managed through a libfprint-based service (frpintd at
the date).
- Explicitly mark libfprint as a shared library
* libfprint-2-2.install: Install hwdb file
* debian/rules:
- Do not autorename upstream rules file anymore.
It's not there, while there's no point to rename the hwdb one.
- Manually set udev hwdb directory (was rules dir before)
- Don't remove the meson generated private values from pc file.
This is now generated correctly by upstream, so no need to drop anything
from it.
* debian: Generate postinst devices list automatically at gbp import phase.
Alternatively provide a script to keep the post-inst script updated
* debian/libfprint-2-2.postinst: Upgrade as per upstream hwdb.
Blacklisted devices can be now removed from the trigger list as we don't
add them to plugdev anymore.
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 21 Jan 2021 19:53:12 +0100
libfprint (1:1.90.7-2) unstable; urgency=medium
* debian/patches: Skip udev rules tests when not all drivers are compiled
* debian/libfprint-2-2.postinst: Regenerate the udev list based on new IDs
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 21 Jan 2021 17:10:57 +0100
libfprint (1:1.90.7-1) unstable; urgency=medium
* New upstream release:
- vfs5011: Fix possible use-after-free
- goodixmoc: Add two new PIDs (0x63AC, 0x639C)
- goodixmoc: Support finger status API
- synaptics: Only identify within provided prints
- synaptics: Reject devices with old firmware during probe (#239)
* debian/patches:
- Refresh, dropping merged
- Include upstream udev fixes and use hardcoded rules
- Ensure that umockdev tests will pass with libusb 1.0.24
(Closes: #977848, #978256)
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 21 Jan 2021 13:38:59 +0100
libfprint (1:1.90.6-2) unstable; urgency=medium
* d/p/meson-Do-not-support-drivers-known-to-fail-in-Big-Endian-.patch:
- Do not enable drivers that are not supported by big endian archs
Upstream patch to only build drivers everywhere but not include them
in the supported list or test them
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 10 Dec 2020 21:32:49 +0100
libfprint (1:1.90.6-1) unstable; urgency=medium
* New upstream release:
- fp_print_deserialize will now correctly return a sunken reference
- Object reference management fixes for FpPrint and identify
- Fixed issues that caused problem on non-x86 machines (#236)
- Fix building with older GLib versions
- synaptics: Support PID 00e7
- goodix: Fix issue with long USB packages
* debian/control:
- Remove Didier Raboud from uploaders (as he requested via bigon).
- Mark libfprint-2-doc as Multi-Arch: foreign
* debian/rules:
- Ignore tests failures in s390x as it now builds and tests correctly
- Increase testing timeout.
* debian/{control,rules,*.install}:
- Switch to debhelper 13 and use its features.
As per this restrict more the .install files wilcards
* debian/gbp.conf: Include suggested settings by GNOME team.
- Even if libfprint is not part of GNOME I think these settings are good
practice anyways.
* debian/patches:
- Refresh
- Add upstream patch to avoid nbis library warnings.
These have been checked to be harmless upstream
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 10 Dec 2020 15:58:37 +0100
libfprint (1:1.90.5-2) unstable; urgency=medium
* d/p/fpi-device-Return-proper-type-on-identification-success.patch,
d/p/test-fpi-device-Always-check-the-return-values-for-the-AP.patch:
- Properly handle identify return value and add tests.
This fixes fprintd test failures in s390x
* d/p/fp-print-Don-t-byte-swap-two-times-the-NBIS-array-content.patch:
- Fixes virtual-image test in libfprint for s390x
* debian/control: Add myself to Uploaders
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Wed, 02 Dec 2020 17:53:32 +0100
libfprint (1:1.90.5-1) unstable; urgency=medium
* New upstream release:
- Remove USB hub from udev autosupend rules
- synaptics: Add PID 0x00c9 which is used in some HP laptops
* debian/patches: Use gbp pq topics for debian-specific patches
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Wed, 02 Dec 2020 05:11:33 +0100
libfprint (1:1.90.4-1) unstable; urgency=medium
* Team upload.
[ Marco Trevisan (Treviño) ]
* New upstream release:
- Work around GUsb cancellation issue
- Redefine internal image device state machine for more robustness
- Add public finger-status reporting to FpDevice
- Rework device removal API to be convenient
- Enable powersave for unsupported USB devices (LP: #1905603)
- Improvements to examples
- synaptics: Support identify operation (LP: #1905600)
- synaptics: Fix possible crash when the interrupt transfer is resubmitted
- synaptics: Add support for PIDs 0x00f9, 0x00fc and 0x00c2
- elan: Add PID 0x0c4d to supported device list
- aes3k: Fix driver and add CI test (LP: #1897613)
- uru4000: Fix reference counting of image transfer
- vfs301: Fix driver and add CI test (LP: #1905597, Closes: #951648)
* debian/libfprint-2-2.symbols: Add new symbols
* debian/rules: Also build the virtual drivers, as they're useful for
testing libfprint and fprintd
[ Laurent Bigonville ]
* debian/control: Bump Standards-Version to 4.5.1 (no further changes)
-- Laurent Bigonville <bigon@debian.org> Tue, 01 Dec 2020 11:36:08 +0100
libfprint (1:1.90.3-1) unstable; urgency=medium
* Team upload.
[ Marco Trevisan (Treviño) ]
* New upstream release
- Fixed crash in VFS0050 (LP: #1876502)
- Enrollment fails with UPEK reader (LP: #1881380)
- Lots of various drivers fixes
- As per a patch for nbis required for some sensors that was accidentally
dropped in an earlier release. Users of sensors/drivers aes1610, aes2501,
aes2550, aes1660, aes2660, elan, upektc_img) need to re-enroll
* d/p/git_reading_pointer.patch:
- Dopped (applied upstream)
[ Laurent Bigonville ]
* New upstream release
-- Laurent Bigonville <bigon@debian.org> Sun, 15 Nov 2020 16:05:30 +0100
libfprint (1:1.90.1-2) experimental; urgency=medium
* Team upload.
[ Laurent Bigonville ]
* debian/control: Add libcairo-dev and python3 to build-dependencies as they
are explicitly required for some tests
[ Sebastien Bacher ]
* debian/patches/git_reading_pointer.patch:
- backport an upstream fix for a test issue
* debian/rules:
- don't fail the build on s390x test results, upstream stated that
fixing those is low priority for them since there is no real
usecase for fingerprint authentification on that architecture.
* Use the correct indentation for the previous changes
-- Laurent Bigonville <bigon@debian.org> Thu, 27 Feb 2020 16:28:45 +0100
libfprint (1:1.90.1-1) experimental; urgency=medium
* Team upload.
* The "I should check if somebody else hasn't done the work already" release
* New upstream release
- Replace libusb-1.0 build-dependency by gusb and add libgusb-doc to the
Build-Depends-Indep. Also drop libxv-dev from the build-dep.
- Drop d/patches/kFreeBSD_FTBFS_add_ETIME_definition.patch and
d/patches/use-non-versionned-libusbh-path.patch, not needed anymore
- debian/patches/udev-rules-creation-add-Debian-specifics.patch: refreshed
by Sebastien Bacher, thanks!
- Bump the soname to libfprint-2
- Bump libglib2.0-dev and meson minimal versions
* Bump debhelper compatibility version to 12
* Add gobject-introspection and libgirepository1.0-dev to the
build-dependencies and install the GObject introspection bindings
* debian/control: Bump Standards-Version to 4.4.1 (no further changes)
* debian/control: Build-Depends on python3-cairo, python3-gi, umockdev for
the testsuite
* Update debian/libfprint2.postinst for the new supported readers
* debian/gbp.conf: Upstream tags have changed format
* debian/control: Bump Standards-Version to 4.5.0 (no further changes)
* d/p/udev-rules-creation-add-Debian-specifics.patch: Avoid unprivileged
users to be able to read the devices, this is not necessary and could lead
to fingerprint images being captured.
-- Laurent Bigonville <bigon@debian.org> Thu, 13 Feb 2020 16:35:50 +0100
libfprint (1:1.0-1) unstable; urgency=medium
* Team upload.
* New upstream release
- d/p/lib-Add-accessor-for-minutia-coordinates.patch,
d/p/fix_ftbfs_meson.patch: Dropped, applied upstream
- Other patches: Refreshed
- debian/libfprint0.symbols: Add newly exported symbol
- debian/libfprint0.postinst: Call udevadm --trigger also for the new
supported readers
* debian/gbp.conf: Set pristine-tar and upstream-vcs-tag
* debian/control: Update Vcs-* fields (Closes: #909256)
* debian/rules: Disable the build of the GTK+ test application for now, this
is not ready yet
* debian/control: Bump Standards-Version to 4.4.0 (no further changes)
* debian/libfprint0.symbols: Add the Build-Depends-Package field
* debian/control: Add libglib2.0-doc to Build-Depends-Indep, this allows
gtk-doc to properly resolve all the links in the documentation
* debian/README.source: Document how the list of devices in
debian/libfprint0.postinst is generated
-- Laurent Bigonville <bigon@debian.org> Fri, 23 Aug 2019 17:27:45 +0200
# Older entries have been removed from this changelog.
# To read the complete changelog use `apt changelog libfprint-2-2`.
Generated by dwww version 1.16 on Sat Oct 3 03:25:44 CEST 2026.