nordvpn (3.19.0) stable; urgency=medium * As quantum computing advances, so do our measures to protect your data. You can now enable post-quantum encryption against the cyber threats of the future. It’s always better to be prepared than to wish you were. Or, as they say: "Be quantum-proof." Use the command: nordvpn set pq on. * Now even more devices can run NordVPN. We’ve added support for ARM64 and ARMHF architecture in the Snap package. * Performance has been optimized, bugs were kicked out, and stability is reinforced. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 18 Sep 2024 10:51:58 +0000 nordvpn (3.18.5) stable; urgency=medium * We’ve tinkered with the internal workings and polished some rough edges. The result? An app that’s better than ever before. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 26 Aug 2024 01:09:04 +0000 nordvpn (3.18.4) stable; urgency=medium * Fixed: Rumor has it that some of you had trouble routing traffic from your Windows PC to a Linux device. That was never our intention, so we've sorted it out. * Fixed: The tray icon used to disappear after you logged out and back into the system. We've fixed it - now it stays. * Fixed: Sometimes the app would throw a confusing error when you tried to connect to a dedicated IP. We've tweaked the app logic to select the right server from your purchased list or show you a clear message if you're not subscribed. * Fixed: Using a Linux device as a VPN gateway previously let LAN traffic through. Fun, right? But not very private. So now, LAN traffic won't get to the internet by default. If you want to route it through your VPN-connect device, just turn on LAN discovery or allowlist specific subnets or IP addresses. * We've also improved how subnet allowlisting works. Accessing an allowlisted subnet or IP no longer requires LAN discovery to be active. * A few other little bugs have been wiped out. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 06 Aug 2024 01:36:04 +0000 nordvpn (3.18.3) stable; urgency=medium * Sometimes, less is more. You can now disable virtual locations using the command virtual-location disable. If you change your mind, run virtual-location enable. * Several weird and rare bugs popped in for a surprise visit. We've taken care of them - end of story. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 09 Jul 2024 04:30:30 +0000 nordvpn (3.18.2) stable; urgency=medium * Exciting news! The NordVPN Linux app is now available on the Snap Store. Installing the app on Linux has never been easier. * If your dedicated IP subscription has expired, we’ll guide you smoothly to the subscription page. Keep that unique IP address all to yourself. * You can now disable the tray icon directly from the tray settings. To bring it back, just run the nordvpn set tray on command. * Fixed: A bug snuck into the last release and broke the allowlist. * Fixed: Kill Switch and LAN discovery didn’t work nicely together after a daemon restart. All good now. -- NordVPN Linux Team <linux@nordvpn.com> Fri, 31 May 2024 11:24:05 +0000 nordvpn (3.18.1) stable; urgency=medium * We've addressed potential security vulnerabilities in this release. Update now for the safest version. -- NordVPN Linux Team <linux@nordvpn.com> Fri, 10 May 2024 10:46:36 +0000 nordvpn (3.18.0) stable; urgency=medium * Introducing our latest companion - the notification tray. This handy addition will give you real-time updates on your VPN connection status. * Fixed: We've gotten rid of the bug that prevented Kill Switch from disabling internet access for Meshnet peers routing traffic through your device. Now when your VPN connection drops and Kill Switch is enabled, it securely blocks internet access for these connections. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 17 Apr 2024 02:40:56 +0000 nordvpn (3.17.4) stable; urgency=medium * Fixed: We discovered that DNS configurations went off-track when your LAN access was enabled. The bug is no more. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 03 Apr 2024 12:29:32 +0000 nordvpn (3.17.3) stable; urgency=medium * Fixed: Routing through Meshnet devices connected to an OpenVPN server used to mean a trip to no-internet land. Not anymore. * Fixed: We've refined help-related messages. They're now more accurate, guiding you without the guesswork. * We’ve made other tweaks and fixes to make your NordVPN experience smoother, faster, and more reliable. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 04 Mar 2024 09:25:16 +0000 nordvpn (3.17.2) stable; urgency=medium * A sneaky little bug related to IPv6 settings crept into our last release, leading to some unexpected connectivity challenges. But worry not! We've caught the culprit and fixed the issue. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 13 Feb 2024 10:12:34 +0000 nordvpn (3.17.1) stable; urgency=medium * With this update, NordVPN better aligns with your custom DNS preferences. If you've set your `/etc/resolv.conf` file to read-only, we will keep your DNS settings unchanged. * As always, we've been on a bug hunt, making sure your NordVPN experience is as smooth as possible. -- NordVPN Linux Team <linux@nordvpn.com> Fri, 02 Feb 2024 05:56:55 +0000 nordvpn (3.17.0) stable; urgency=medium * New in Meshnet: Now you can personalize your Meshnet devices with custom nicknames, making them easier to identify and remember. * File sharing refinements and a few other improvements here and there. * Clear your file sharing history using the command 'nordvpn fileshare clear' - because who says you can't rewrite a bit of your digital past? -- NordVPN Linux Team <linux@nordvpn.com> Fri, 29 Dec 2023 08:54:47 +0000 nordvpn (3.16.9) stable; urgency=medium * A selection of minor tweaks and fixes under the hood to make the NordVPN app work better for you. Because routine maintenance is just as important as a new shiny feature. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 28 Nov 2023 09:13:21 +0000 nordvpn (3.16.8) stable; urgency=medium * We've given a speed boost for connections between peer devices in Meshnet. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 09 Nov 2023 01:14:56 +0000 nordvpn (3.16.7) stable; urgency=medium * We’ve improved our “Help” articles on logging in and file sharing, as well as the Meshnet documentation. * Fixed: The issue of Meshnet sometimes causing high CPU usage has been solved. * Other minor fixes and improvements. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 18 Oct 2023 01:38:11 +0000 nordvpn (3.16.6) stable; urgency=medium * New setting: local network discovery. Turn it on when you need to access your local network while connected to a VPN, routing traffic through a Meshnet device, or having Kill Switch enabled. * IP and port allowlisting improvements. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 28 Aug 2023 06:19:42 +0000 nordvpn (3.16.5) stable; urgency=medium * ixed: A bug that slipped into the previous release and showed irrelevant messages is gone now. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 01 Aug 2023 09:57:34 +0000 nordvpn (3.16.4) stable; urgency=medium * Autocompletion now works with file sharing commands. * You can accept and decline file transfers from notifications. * For seamless file sharing with peers you trust, use the “auto-accept” setting to always accept transfers from a specific peer. We won’t ask you to approve each transfer – files will start downloading automatically. * Under-the-hood file sharing upgrades for faster transfers, lower latency, and tighter security. * Improvements in VPN performance: The auto-connect bug is fixed, and random logouts should no longer interrupt your connection. * Fixed: Port/subnet whitelisting works as expected again. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 03 Jul 2023 10:41:54 +0000 nordvpn (3.16.3) stable; urgency=medium * We improved how command line parameters are handled to avoid connection errors caused by typing in all caps. * Thanks to the community of our eagle-eyed contributors, we’ve removed a bunch of typos. * Arguments in our help texts now follow the POSIX.1-2017 standard. * We implemented a security upgrade for the connections over the OpenVPN protocol. * Peers without an IP address will now be skipped when managing Meshnet configuration. * We fixed a bug that prevented sharing files over Meshnet. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 01 Jun 2023 09:45:12 +0000 nordvpn (3.16.2) stable; urgency=medium * Logging in with a username and password is no longer available in the terminal as we've switched to more secure login options. * Thanks to the community of our eagle-eyed contributors, we've removed a bunch of typos. * * mprovements in file sharing over Meshnet: * Notifications will inform you about the file transfer status. * Transfers containing no files will be rejected automatically. * Error messages have been updated for more clarity and precision. * Fixed: We'll show the correct status for transfers canceled by the sender. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 24 Apr 2023 09:30:33 +0000 nordvpn (3.16.1) stable; urgency=medium * Fixed: A curious case of connections to OpenVPN servers failing on Fedora came to our attention. We put on our detective hats and solved the mystery. -- NordVPN Linux Team <linux@nordvpn.com> Fri, 24 Mar 2023 10:12:27 +0000 nordvpn (3.16.0) stable; urgency=medium * Autosuggest now displays countries and groups. * We’ve added filters for the ‘mesh peer list’ command. Explore all the options using ‘nordvpn mesh peer list --help’ * Meshnet invitations now contain settings for traffic routing. * We’ve improved how auto-connect and obfuscation features interact. * Minor bug fixes here and there. -- NordVPN Linux Team <linux@nordvpn.com> Fri, 10 Mar 2023 09:14:16 +0000 nordvpn (3.15.5) stable; urgency=medium * Fixed: We've eliminated a bug causing Meshnet connectivity issues. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 20 Feb 2023 08:37:50 +0000 nordvpn (3.15.4) stable; urgency=medium * Connections via Meshnet are faster now! * We improved how invitations to link devices are displayed. * Performance improvements beneath the surface. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 26 Jan 2023 10:10:21 +0000 nordvpn (3.15.3) stable; urgency=medium * Fixed: It appears our app is not the morning type as it would crash after the computer had resumed from sleep mode. We took the strongest measures – code and coffee – to fix the situation, and they helped. * A few security upgrades. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 28 Dec 2022 05:52:55 +0000 nordvpn (3.15.2) stable; urgency=medium * Fixed: Rumor has it that some new users have found the Meshnet feature missing. We’ve checked – nothing paranormal here. Meshnet is available for everyone again. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 06 Dec 2022 03:53:28 +0000 nordvpn (3.15.1) stable; urgency=medium * We've been laying the groundwork for speed and latency improvements in Meshnet. * Fixed: We now show a correct status when you're routing traffic through a peer device and a relevant error message if the traffic routing fails. No more miscommunication here. * As the holidays are fast approaching, we've been working on our app's naughty-or-nice score. A bunch of mischievous bugs have been dispatched with a mission of no return. * The application now works with older distributions. * Minor security upgrades. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 28 Nov 2022 09:08:42 +0000 nordvpn (3.15.0) stable; urgency=medium * New in Meshnet: When routing traffic through a linked computer, you’ll have access to its local network devices instead of yours – if the linked computer has granted this permission to you. And the other way around: you can allow or block access to your local network for each device that's routing traffic through your computer. Use the `nordvpn mesh peer local` command to control this permission. * You can now log in by using a token generated in your Nord Account. See `--token` option in `nordvpn login --help`. * Added the `routing` setting. See `nordvpn set routing --help`. * Added the `fwmark` setting. See `nordvpn set fwmark --help`. * Fixed: The app version is now displayed properly in the manual page. * Fixed: The app no longer gets stuck in the `connecting` state when you're offline and the set protocol is OpenVPN. * Fixed: Meshnet now works on PureOS. * Minor fixes in Meshnet. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 17 Oct 2022 09:52:23 +0000 nordvpn (3.14.2) stable; urgency=medium * New feature: Meshnet! From now on, you only need the NordVPN app with Meshnet enabled to connect to remote devices securely. Link up to 10 of your own devices and 50 devices of other NordVPN users. Meshnet is great for accessing and sharing files, playing multiplayer games, or getting some work done on shared projects! Use the `nordvpn set meshnet on` command to turn it on. To find all Meshnet-related commands and get help, type `nordvpn meshnet`. * Fixed: The app wasn't following specific commands when connected to the VPN or kept ignoring your notification preferences when using `nordvpn set notify`. Order has been restored. * Fixed: Sometimes the app failed to set a DNS address properly, resulting in it not being able to connect you to VPN. That shouldn't be the case anymore. * Fixed: Connecting to the VPN while having Kill Switch on is no longer a challenge for the app. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 28 Jul 2022 09:56:51 +0000 nordvpn (3.14.1) stable; urgency=medium * Fixed: Some users had an issue with the app freezing at random. Rumor has it, some were even confronted with the never-ending spinner. The bug causing the trouble is fixed now, and the app is set to run smoothly without awkward silent interruptions. * Better: When opened, the app will now greet you with a list of useful commands displayed in the terminal. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 13 Jun 2022 07:35:25 +0000 nordvpn (3.14.0) stable; urgency=medium * CyberSec is now Threat Protection Lite! Accordingly, its default command is now `nordvpn set threatprotectionlite on/off` — but the old `nordvpn set cybersec on/off` will also work for your convenience. Naming aside, it's still the same feature and still blocks malicious sites and ads while connected to VPN. * A few performance improvements are in place. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 01 Jun 2022 11:41:16 +0000 nordvpn (3.13.0) stable; urgency=medium * NordLynx is now the default VPN protocol in our Linux app. * We made changes in firewall handling. Now we filter packets by firewall marks instead of IP addresses of VPN servers. * A few performance improvements are in place. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 23 May 2022 09:16:04 +0000 nordvpn (3.12.5) stable; urgency=medium * We switched from destination-based to policy-based traffic routing. * Fixed: A bug that slipped into the previous release and prevented OpenVPN from working on any devices except ones with the AMD64 architecture. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 14 Mar 2022 09:31:12 +0000 nordvpn (3.12.4) stable; urgency=medium * A selection of minor tweaks and fixes under the hood to make the NordVPN app work better for you. Because routine maintenance is just as important as a new shiny feature. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 10 Feb 2022 08:08:41 +0000 nordvpn (3.12.3) stable; urgency=medium * Better: We’ve improved our messaging for better guidance in cases of an unsuccessful login. * Fixed: Connecting to a specific server by using tags works smoothly again. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 11 Jan 2022 02:30:47 +0000 nordvpn (3.12.2) stable; urgency=medium * Now our app versions are listed in chronological order instead of alphabetically in package managers. * Fixed: We solved a bug that has slipped into the previous release and got in your way when trying to use the 'nordvpn connect [country] [city]' command. * Fixed: There were a few unexpected errors in our app for the Fedora distribution, but not anymore. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 16 Dec 2021 01:13:37 +0000 nordvpn (3.12.1) stable; urgency=medium * Fixed: The server search by group works smoothly again. * Fixed: We’ve found the culprit behind unexpected app crashes during updates, so there should be no more interruptions. * Fixed: The app no longer acts mysteriously and shows up in the Ubuntu Software Updater with the correct name and icon now. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 18 Nov 2021 03:34:04 +0000 nordvpn (3.12.0) stable; urgency=medium * Our app for Linux joins the rest of NordVPN apps with the login flow via Nord Account. It's the platform that unifies all Nord services and eliminates the need for multiple accounts and passwords. It also lets you add an extra layer of security to your account with multi-factor authentication. * * o log in with Nord Account, use the command `nordvpn login --nordaccount`. We’ll take you to your browser for login and then bring you back to the app. Smooth. * * ou can still log in with the `nordvpn login` command, so choose the way which works better for you. * * A few performance and security improvements are in place. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 03 Nov 2021 07:52:21 +0000 nordvpn (3.11.0) stable; urgency=medium * We did some under-the-hood work to make connecting to VPN even faster. * Fixed: If you’ve noticed that auto-completion for commands stopped working, you’re not imagining things. We kind of lost it on the Z-shell Linux because of a pesky bug that slipped into the previous release. Now commands can be smoothly auto-completed again! * Fixed: We solved the case of the app sometimes displaying an incorrect error message after unsuccessful login. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 28 Sep 2021 12:26:04 +0000 nordvpn (3.10.0) stable; urgency=medium * NordVPN now supports IPv6 on Linux. To enable it, use the command `nordvpn set ipv6 on`. * Now there’s one more way to check which NordVPN version you’re running – simply type `nordvpn version`. Commands `nordvpn --version` and `nordvpn -v` still work too. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 26 May 2021 12:36:26 +0000 nordvpn (3.9.5) stable; urgency=medium * As suggested by our user community, we’re switching from the default Linux password entry to something more user-friendly: from now on, when you type your password to log in, we’ll hide each symbol under an asterisk (*) so you can see that you’re actually typing. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 25 May 2021 09:21:42 +0000 nordvpn (3.9.4) stable; urgency=medium * Fixed: A bug that slipped into the previous release to hinder installing and updating NordVPN on some RPM-based distributions is now gone. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 13 May 2021 11:48:38 +0000 nordvpn (3.9.3) stable; urgency=medium * Fixed: the app will no longer randomly say that your account has expired when it’s not the case. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 10 May 2021 01:45:09 +0000 nordvpn (3.9.2) stable; urgency=medium * Improved application logs handling: Instead of a file, which sometimes may take up more space than desired, logs are now provided as standard output to give you more control. * Fixed: There was a bug of a rare kind that would make every single connection fail, and only a system restart could stop this vicious cycle. The bug is no more. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 14 Apr 2021 05:35:59 +0000 nordvpn (3.9.1) stable; urgency=medium * Don’t wait until you disconnect – rate your VPN connection anytime it’s active. Give feedback about your current connection by using the `nordvpn rate` command. * Besides resetting to default settings, the `nordvpn set defaults` command now also stops VPN connection. * Fixed: Auto-completion for commands works smoothly again. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 29 Mar 2021 08:23:02 +0000 nordvpn (3.9.0) stable; urgency=medium * New command: Type `nordvpn whitelist remove all` to clear all items in the whitelist. * New command: `nordvpn set firewall on/off`. It lets you choose whether the app should set up a firewall or not. * If you stop a daemon process, Kill Switch also stops working. This helps to avoid losing internet connection unexpectedly. * Fixed: Auto-connect works more smoothly now. * Fixed: We fixed the connection issues on network restart. * Fixed: Sometimes, VPN wouldn’t disconnect properly when logging out, but no more. * And more minor yet important improvements and bug fixes for your better experience with NordVPN. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 18 Mar 2021 01:07:54 +0000 nordvpn (3.8.10) stable; urgency=medium * Fixed: NordVPN runs smoothly again on Ubuntu 18.04. * Minor improvements in security and performance. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 05 Jan 2021 02:09:09 +0000 nordvpn (3.8.9) stable; urgency=medium * Fixed: unreachable daemon after an upgrade. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 28 Dec 2020 08:25:54 +0000 nordvpn (3.8.8) stable; urgency=medium * run daemon with nordvpn group * socket is only accessible to users that belong to nordvpn group or root -- NordVPN Linux Team <linux@nordvpn.com> Thu, 17 Dec 2020 09:13:19 +0000 nordvpn (3.8.7) stable; urgency=medium * Fixed: a bug where account and login commands would not work when killswitch is on. -- NordVPN Linux Team <linux@nordvpn.com> Fri, 20 Nov 2020 10:47:10 +0000 nordvpn (3.8.6) stable; urgency=medium * Fixed: NordLynx connection is restored after waking up from system suspend. -- NordVPN Linux Team <linux@nordvpn.com> Fri, 30 Oct 2020 10:02:26 +0000 nordvpn (3.8.5) stable; urgency=medium * Fixed: incorrectly showing expired account error. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 22 Sep 2020 08:16:21 +0000 nordvpn (3.8.4) stable; urgency=medium * Fixed: whitelist is less strict by allowing ports to be used in both directions. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 10 Sep 2020 09:12:36 +0000 nordvpn (3.8.3) stable; urgency=medium * Fixed: firewall not working properly on older distros such as Ubuntu 14.04 -- NordVPN Linux Team <linux@nordvpn.com> Tue, 08 Sep 2020 02:27:59 +0000 nordvpn (3.8.2) stable; urgency=medium * Fixed: whitelist does not create routes anymore. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 08 Sep 2020 12:16:23 +0000 nordvpn (3.8.1) stable; urgency=medium * Fixed: whitelist is less strict by allowing ports to be used in both directions. -- NordVPN Linux Team <linux@nordvpn.com> Fri, 04 Sep 2020 10:42:08 +0000 nordvpn (3.8.0) stable; urgency=medium * What’s better: Kill Switch and Whitelist work nicely together now. * What’s fixed: We got rid of a bug that sometimes prevented auto-connect from working as it should. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 16 Jul 2020 06:38:59 +0000 nordvpn (3.7.4) stable; urgency=medium * NordLynx is now even faster to connect to a VPN server. * Improved VPN performance in obfuscated mode. -- NordVPN Linux Team <linux@nordvpn.com> Fri, 12 Jun 2020 12:27:16 +0000 nordvpn (3.7.3) stable; urgency=medium * Fixed: Kill Switch now works as smoothly with NordLynx as it does with OpenVPN. If you enable Kill Switch while connected to a NordLynx server, it won’t interrupt your current connection. * Fixed: In case your connection to a NordLynx server fails, the app will now show a correct message informing about the failed connection. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 20 May 2020 06:38:36 +0000 nordvpn (3.7.2) stable; urgency=medium * Sometimes, a slow internet connection would prevent users from connecting to VPN successfully. We increased the timeout for API requests to make VPN experience smoother regardless of the internet quality. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 06 May 2020 08:17:47 +0000 nordvpn (3.7.1) stable; urgency=medium * Removed gawk dependency, which was needed for autocompletion to work on older systems. Now autocompletion should work just fine without it. * We made dockerizing the app easier to give you more flexibility. * Added more information to logs so we can troubleshoot more effectively. * Fixed: Now the app handles your manually whitelisted destinations better. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 16 Apr 2020 04:25:17 +0000 nordvpn (3.7.0) stable; urgency=medium * hat's new: * Now you can restore default settings by using the `nordvpn set defaults` command. * Access resources (computers, printers, TVs – you name it) while using VPN – now no matter on what network you’re on. * se the `nordvpn whitelist add subnet` command to specify subnet addresses. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 12 Mar 2020 02:38:42 +0000 nordvpn (3.6.1) stable; urgency=medium * Fixed: there was an edge case where the Kill Switch would disconnect you from the internet after a computer reboot. The evil bug is gone now. -- NordVPN Linux Team <linux@nordvpn.com> Fri, 07 Feb 2020 11:28:20 +0000 nordvpn (3.6.0) stable; urgency=medium * If you ever want to create a new NordVPN account, you can do it right in the app – use the command `nordvpn register`. * Fixed: Autocompletion – the magic that cuts down key presses and saves you from typos in commands – wasn’t working properly in some distributions. Now it’s working completely fine. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 02 Jan 2020 01:08:32 +0000 nordvpn (3.5.0) stable; urgency=medium * Introducing the revamped internet Kill Switch for ultra security: when enabled, it will block your device from accessing the internet when you're not connected to VPN. * Wrong commands happen. If you changed your mind after entering 'nordvpn connect [country/city/group/server]', you can cancel the VPN connection attempt with Ctrl+C and start over. * Updated OpenVPN binaries to 2.4.8. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 05 Dec 2019 01:34:00 +0000 nordvpn (3.4.0) stable; urgency=medium * We made it easier for you to try NordLynx – the solution for a fast, secure, and private VPN connection. To start using NordLynx, you no longer have to download the WireGuard® package. Use the command ‘nordvpn set technology nordlynx’ – and that’s it! * The ‘nordvpn settings’ command shows the VPN technology you’re currently using: OpenVPN or NordLynx. * Here’s a little time-saver: when you’re connected to VPN and want to switch to another server or location, you can do it without disconnecting first. * When connecting to group servers, you can specify the location, for example, ‘nordvpn connect --group p2p Canada’. * Oh, and we almost forgot – a bunch of various fixes and improvements to make the app run smoother. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 21 Oct 2019 10:02:09 +0000 nordvpn (3.3.1) stable; urgency=medium * In the previous release, we introduced NordLynx – a solution for a fast and secure VPN connection based on WireGuard®. Now we’re bringing a few improvements to make your NordLynx experience even better: * * . The CyberSec feature now plays nicely with NordLynx. You can still block ads and shield yourself from malware after switching from OpenVPN. * . Auto-connect now works smoothly. We fixed the bug where the app was trying to connect to VPN way too soon – even before your computer connected to the internet. * * Also, we’ve added subtle tweaks and squished a few minor bugs to make NordVPN work better for you. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 19 Aug 2019 11:20:45 +0000 nordvpn (3.3.0) stable; urgency=medium * We’re introducing NordLynx – the solution for a fast, secure, and private VPN connection. Our NordLynx technology is based on WireGuard® and lets you experience its speed benefits without compromising your privacy. * * y default, NordVPN for Linux runs on the OpenVPN protocol. After you download the latest version, follow these steps to switch to NordLynx: * * . Install WireGuard. Tutorials for different distributions are available in our Help Center: https://support.nordvpn.com/1362931332/ * . Open the terminal and enter ‘nordvpn set technology NordLynx’. * . Enter ‘nordvpn c’ to connect to VPN. * * hat’s it – now your app is running on NordLynx. You can always switch back to OpenVPN by entering ‘nordvpn set technology OpenVPN’. * * Now you can give us instant feedback about your connection speeds. Was it like driving an F1 racer? Or rather a slow and bumpy ride? We want to know. Your feedback will help us improve! * * A few sneaky bugs that managed to slip into the previous release are gone now. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 30 Jul 2019 10:00:00 +0000 nordvpn (3.2.0) stable; urgency=medium * New command: type ‘account’ to get your account information, such as subscription status and expiration date. * Improved performance and connectivity. * And something more than meets the eye: we’re tinkering with the things underneath to make your NordVPN experience even better. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 04 Jul 2019 09:00:00 +0000 nordvpn (3.1.0) stable; urgency=medium * Our users asked, we listened: sysV is supported again. * After releasing the previous version, MX Linux users got left behind. So we’re fixing it with this release. * Quick Connect works all better now. * Improved DNS leak protection handling. * Minor fixes here and there. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 04 Jun 2019 12:00:00 +0000 nordvpn (3.0.1) stable; urgency=medium * New: We want you to get the best experience using the latest version of NordVPN. That’s why we’ve implemented a version checker. Now, we will notify you when it’s time to update – just to make sure you’re not missing out on any of our features by using an older app version. * Fixed: The quick-connect command selects the best server for you. However, sometimes it would pick one of our specialty servers. We understand you might not want one. So now it’s only our regular servers you can be quick-connected to. * Fixed: When auto-connecting to VPN on startup, our app had a hard time handling your whitelisted ports. Now everything works as intended. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 09 May 2019 12:17:39 +0000 nordvpn (3.0.0) stable; urgency=medium * Introducing specialty server groups. * New notifications added – only the important stuff. You can disable or enable them anytime. * The one for seamless security: if the connection with a server is lost, you will be automatically reconnected to another best server available. * Implemented whitelisting of ports and subnets. * More settings are shown. * Now you can log in using command line arguments. * Improved performance and connectivity. * OpenVPN bins now updated to version 2.4.7 * Improved DNS leak protection handling. * SysV is no longer supported. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 17 Apr 2019 09:00:00 +0000 nordvpn (2.2.0) stable; urgency=medium * Implemented improvements to boost VPN performance in countries with heavy internet restrictions. * Added a possibility to connect to specialty servers. * From now on, a notification will show up when you connect or disconnect from VPN. * Solved network connectivity issues. * Did some behind-the-scenes tinkering for slicker app experience. -- NordVPN Linux Team <linux@nordvpn.com> Wed, 09 Jan 2019 12:30:00 +0000 nordvpn (2.1.0) stable; urgency=medium * Now the NordVPN app supports older Linux distributions. * Added a manual page where you can find the list of commands, examples, and more. * The ‘nordvpn status’ got leveled up! It now shows country and region (if applicable) you’re connected to, as well as the connection time. * Fixed a double-faced bug, which prevented disconnecting from VPN properly, or caused the app to crash when running the ‘nordvpn status’ command. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 29 Nov 2018 05:30:00 +0000 nordvpn (2.0.0) stable; urgency=medium * The NordVPN 2.0.0 is here – all better from the ground up! * The server picker algo-rhythm is a dancer with smart moves and new grooves. The algorithm is lightweight and extra smart now, so it selects the best server for you with even higher accuracy. * With this version, we say ‘yes’ to custom DNS. You can set your preferred DNS server manually by using ‘nordvpn set dns’. * The list of countries is now displayed neatly. * You can see a list of cities where servers are located in a specific country. * Poker face no more – we’re introducing loader, that is, a spinning indicator showing that your command is running. * Did some fine-tuning for the auto-connect. When it’s set, the app launches on startup and connects to VPN. If internet network errors occur, the app attempts to reconnect to VPN automatically. * Fixed: sometimes, the ‘nordvpn status’ has been failing to indicate the current server correctly, especially after changing a few of them quickly. Now, the status is shown real-time, indeed. * Fixed: putting a computer to sleep has been causing the app to quit, but not anymore: NordVPN continues to run and restarts VPN connection after a computer wakes up. -- NordVPN Linux Team <linux@nordvpn.com> Mon, 19 Nov 2018 09:00:00 +0000 nordvpn (1.3.6) stable; urgency=medium * Introducing obfuscated servers. They serve as a “plan B” to connect to VPN if the regular way isn’t working due to tight Internet restrictions and censorship. In any other ways, regular and specialty servers will work. * From now on, you can choose servers by city! Because, well yeah, it matters – San Francisco or New York, Perth or Sydney. * Enjoy a more extensive selection of servers, all thanks to implemented server templates. * Download and upload speeds are no longer a mystery – your bandwidth stats now are a part of ‘nordvpn status.’ -- NordVPN Linux Team <linux@nordvpn.com> Wed, 17 Oct 2018 12:19:06 +0000 nordvpn (1.1.10) stable; urgency=medium * Now you can select the way the app handles Internet connection hiccups. * We added a possibility to whitelist specific ports to make certain services work even after the Kill Switch kicks in. * Expanded the app compatibility with Raspberry Pi, all thanks to the new architecture added. * When it comes to typing commands, the autocomplete widget is there to make everything easier. We improved the autosuggestions, so they’re always on point. For example, it doesn’t matter anymore whether you type ‘nordvpn connect Germany’, or ‘nordvpn connect germany’ – now we get the idea both ways. -- NordVPN Linux Team <linux@nordvpn.com> Tue, 18 Sep 2018 12:00:00 +0000 nordvpn (1.1.6) stable; urgency=medium * Do you know the Internet-famous cute little penguin that slides on his tummy down the hill? We strive to make our user experience just like that – exciting and smooth. With a few new notes for guidance and more detailed help commands, we believe we’re getting there. * We added extra powers to the ‘nordvpn status’ command, so now it shows the connection status, the server you’re connected to, your new IP address and the Internet protocol in use (TCP or UDP). * Improved compatibility with older OpenVPN versions. NordVPN works with the OpenVPN version 2.3.0 and later. * For the sake of effective troubleshooting, we fine-tuned the app activity logging to make it more detail. * Did some behind the scenes tinkering for a better app experience. And by saying ‘better’, we mean ‘bug-free’. -- NordVPN Linux Team <linux@nordvpn.com> Thu, 30 Aug 2018 07:09:48 +0000 nordvpn (1.1.5) stable; urgency=medium * First public release! -- NordVPN Linux Team <linux@nordvpn.com> Tue, 21 Aug 2018 07:16:00 +0000
Generated by dwww version 1.14 on Wed Jan 29 07:43:12 CET 2025.