dwww: tpablo.net

foo2oak-wrapper(1) General Commands Manual foo2oak-wrapper(1)

NAME
foo2oak-wrapper - Convert Postscript into an OAKT printer stream

SYNOPSIS
foo2oak-wrapper [options] [ps-file]

DESCRIPTION
foo2oak-wrapper is a Foomatic compatible printer wrapper for the
foo2oak printer driver. This script reads a Postscript ps-file or
standard input and converts it to Oak Technology OAKT printer format
for driving the HP Color LaserJet 1500 laser printer, Kyocera
KM-1636/KM-2035 copiers, and other OAKT-based printers.

This script can be used in a standalone fashion, but is intended to be
called from a printer spooler system which uses the Foomatic printer
database.

COMMAND LINE OPTIONS
Normal Options
These are the options used to select the parameters of a print job that
are usually controlled on a per job basis.

-b bits
Number of bits per plane (1 or 2) [1].

-c Print in color (else monochrome).

-d duplex
Duplex code to send to printer [1].
│ │ │
│1 off │ 2 long edge │ 3 short edge

-m media
Media code to send to printer [1].

─────────────────────────────────────
Media HP CLJ 1500 KM-1635
-z0 -z1
─────────────────────────────────────
autoselect 0 0
plain 1 1
preprinted 2 2
letterhead 3 3
transparency 4 4
prepunched 5 5
labels 6 6
bond 7 7
recycled 8 8
color 9 9
cardstock 10 10
envelope 11 11
light 13 na
tough 14 na
vellum na 15
rough na 16
thick na 19
highqual na 20

-p paper
Paper size code to send to printer [1].

┌─────────────────┬─────────────────┐
│ 1 letter │ 3 ledger │
│ 5 legal │ 6 statement │
│ 7 executive │ 8 A3 │
│ 9 A4 │ 11 A5 │
│ 12 B4 │ 13 B5jis │
│ 14 folio │ 19 env9 │
│ 20 env10 │ 27 envDL │
│ 28 envC5 │ 30 envC4 │
│ 37 envMonarch │ 257 A6 │
│258 B6 │ 259 B5iso │
│260 env6 │ │
└─────────────────┴─────────────────┘
-n copies
Number of copies [1].

-r xresxyres
Set device resolution in pixels/inch [600x600].

-s source
Source (Input Slot) code to send to printer [7].
│ │
│1 tray1 │ 2 tray2
│4 manual │ 7 auto

-2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
Print in N-up. Requires the psutils package.

-o orient
Orientation used for N-up.

Portrait -op (normal)
Landscape -ol (rotated 90 degrees anticlockwise)
Seascape -os (rotated 90 degrees clockwise)

Printer Tweaking Options
These are the options used to customize the operation of foo2oak for a
particular printer.

-u xoffxyoff
Set the offset of the start of the printable region from the up-
per left corner, in pixels [varies with paper size]. The de-
faults should work on the 2200DL and 2300DL, and have not been
tested on any other printers.

-l xoffxyoff
Set the offset of the end of the printable region from the lower
right corner, in pixels [varies with paper size]. The defaults
should work on the 2200DL and 2300DL, and have not been tested
on any other printers.

-L mask
Send the logical clipping values from -u/-l in the OAKT stream.
foo2oak-wrapper always runs Ghostscript with the ideal page di-
mensions, so that the scale of the image is correct, regardless
whether or not the printer has unprintable regions. This option
is used to move the position of the clipped image back to where
it belongs on the page. The default is to send the amount which
was clipped by -u and -l, and should be good in most cases.

0 don't send any logical clipping amounts
1 only send Y clipping amount
2 only send X clipping amount
3 send both X and Y clipping amounts

-z model
Model is 0 for the HP Color LaserJet 1500, and 1 for the Kyocera
KM-1635/KM-2035 copiers. The default is 0.

Color Tweaking Options
These are the options used to control the quality of color output.
Color correction is currently a WORK IN PROGRESS.

-g gsopts
Additional options to pass to Ghostscript, such as
-g“-dDITHERPPI=nnn”, etc. This option may appear more than
once.

-G profile.icm
Convert profile.icm to a Postscript color rendering dictionary
(CRD) using foo2zjs-icc2ps and adjust the printer colors by us-
ing the Postscript setcolorrendering operator. (WORK IN
PROGRESS).

-G gamma-file.ps
Prepend gamma-file.ps to the Postscript input to perform color
correction using the setcolortransfer Postscript operator. For
example, the file might contain:
{0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer

-I intent
Select profile intent from the ICM file. 0=Perceptual, 1=Col-
orimetric, 2=Saturation, 3=Absolute. Default is 0 (perceptual).

Debugging Options
These options are used for debugging foo2oak and its wrapper.

-S plane
Output just a single color plane from a color print and print it
on the black plane. The default is to output all color planes.

1 Cyan
2 Magenta
3 Yellow
4 Black

-D level
Set Debug level [0].

EXAMPLES
Create a monochrome OAKT stream from a Postscript document, examine it,
and then print it using a RAW print queue:

foo2oak-wrapper testpage.ps > testpage.oak
oakdecode < testpage.oak
lpr -P raw testpage.oak

Create a color OAKT stream from a Postscript document:

foo2oak-wrapper -c testpage.ps > testpage.oak

FILES
/usr/bin/foo2oak-wrapper