NVME-MICRON-SMART(1) NVMe Manual NVME-MICRON-SMART(1)
NAME
nvme-micron-smart-add-log - Retrieves NAND statistics (2200 model
drives) or Extended SMART information (OCP complaint models) of given
micron device
SYNOPSIS
nvme micron vs-smart-add-log <device> -f <json|normal>
DESCRIPTION
This command prints NAND information (Total bytes written, Bad block
count and Erase failures etc) for the given micron device if its of 2200
model controller. For OCP complaint controllers this command print
extended SMART health data along with NAND information (if available)
The <device> parameter is mandatory and may be either the NVMe character
device (ex: /dev/nvme0), or a namespace block device (ex: /dev/nvme0n1).
The -f option controls the displayed output data format based on the
option value. If the option value is json (which is enabled by default),
output data is printed in JSON format. If option value is normal the
output is displayed in non-JSON format.
This will only work on Micron devices devices of model numbers 54XX and
OCP complaint controllers. Support for new devices may be added
subsequently.
OPTIONS
-f <json|normal>
Controls the format of displayed output.
EXAMPLES
• Retrieve NAND/extended SMART data and display in json format
# nvme micron vs-nand-stats /dev/nvme0
* Retrieve NAND/extended SMART data and display in non-json format
+
# nvme micron vs-nand-stats /dev/nvme0 -f normal
NVME
Part of the nvme-user suite
NVMe 05/02/2025 NVME-MICRON-SMART(1)
Generated by dwww version 1.16 on Tue Nov 3 14:57:09 CET 2026.