PERF-C2C(1) perf Manual PERF-C2C(1)
NAME
perf-c2c - Shared Data C2C/HITM Analyzer.
SYNOPSIS
perf c2c record [<options>] <command>
perf c2c record [<options>] -- [<record command options>] <command>
perf c2c report [<options>]
DESCRIPTION
C2C stands for Cache To Cache.
The perf c2c tool provides means for Shared Data C2C/HITM analysis. It
allows you to track down the cacheline contentions.
On x86, the tool is based on load latency and precise store facility
events provided by Intel CPUs. On PowerPC, the tool uses random
instruction sampling with thresholding feature.
These events provide: - memory address of the access - type of the
access (load and store details) - latency (in cycles) of the load
access
The c2c tool provide means to record this data and report back access
details for cachelines with highest contention - highest number of HITM
accesses.
The basic workflow with this tool follows the standard record/report
phase. User uses the record command to record events data and report
command to display it.
RECORD OPTIONS
-e, --event=
Select the PMU event. Use perf c2c record -e list to list available
events.
-v, --verbose
Be more verbose (show counter open errors, etc).
-l, --ldlat
Configure mem-loads latency. (x86 only)
-k, --all-kernel
Configure all used events to run in kernel space.
-u, --all-user
Configure all used events to run in user space.
REPORT OPTIONS
-k, --vmlinux=<file>
vmlinux pathname
-v, --verbose
Be more verbose (show counter open errors, etc).
-i, --input
Specify the input file to process.
-N, --node-info
Show extra node info in report (see NODE INFO section)
-c, --coalesce
Specify sorting fields for single cacheline display. Following
fields are available: tid,pid,iaddr,dso (see COALESCE)
-g, --call-graph
Setup callchains parameters. Please refer to perf-report man page
for details.
--stdio
Force the stdio output (see STDIO OUTPUT)
--stats
Display only statistic tables and force stdio mode.
--full-symbols
Display full length of symbols.
--no-source
Do not display Source:Line column.
--show-all
Show all captured HITM lines, with no regard to HITM % 0.0005
limit.
-f, --force
Don’t do ownership validation.
-d, --display
Switch to HITM type (rmt, lcl) to display and sort on. Total HITMs
as default.
--stitch-lbr
Show callgraph with stitched LBRs, which may have more complete
callgraph. The perf.data file must have been obtained using perf
c2c record --call-graph lbr. Disabled by default. In common cases
with call stack overflows, it can recreate better call stacks than
the default lbr call stack output. But this approach is not full
proof. There can be cases where it creates incorrect call stacks
from incorrect matches. The known limitations include exception
handing such as setjmp/longjmp will have calls/returns not match.
C2C RECORD
The perf c2c record command setup options related to HITM cacheline
analysis and calls standard perf record command.
Following perf record options are configured by default: (check perf
record man page for details)
-W,-d,--phys-data,--sample-cpu
Unless specified otherwise with -e option, following events are
monitored by default on x86:
cpu/mem-loads,ldlat=30/P
cpu/mem-stores/P
and following on PowerPC:
cpu/mem-loads/
cpu/mem-stores/
User can pass any perf record option behind -- mark, like (to enable
callchains and system wide monitoring):
$ perf c2c record -- -g -a
Please check RECORD OPTIONS section for specific c2c record options.
C2C REPORT
The perf c2c report command displays shared data analysis. It comes in
two display modes: stdio and tui (default).
The report command workflow is following: - sort all the data based on
the cacheline address - store access details for each cacheline - sort
all cachelines based on user settings - display data
In general perf report output consist of 2 basic views: 1) most
expensive cachelines list 2) offsets details for each cacheline
For each cacheline in the 1) list we display following data: (Both
stdio and TUI modes follow the same fields output)
Index
- zero based index to identify the cacheline
Cacheline
- cacheline address (hex number)
Rmt/Lcl Hitm
- cacheline percentage of all Remote/Local HITM accesses
LLC Load Hitm - Total, LclHitm, RmtHitm
- count of Total/Local/Remote load HITMs
Total records
- sum of all cachelines accesses
Total loads
- sum of all load accesses
Total stores
- sum of all store accesses
Store Reference - L1Hit, L1Miss
L1Hit - store accesses that hit L1
L1Miss - store accesses that missed L1
Core Load Hit - FB, L1, L2
- count of load hits in FB (Fill Buffer), L1 and L2 cache
LLC Load Hit - LlcHit, LclHitm
- count of LLC load accesses, includes LLC hits and LLC HITMs
RMT Load Hit - RmtHit, RmtHitm
- count of remote load accesses, includes remote hits and remote HITMs
Load Dram - Lcl, Rmt
- count of local and remote DRAM accesses
For each offset in the 2) list we display following data:
HITM - Rmt, Lcl
- % of Remote/Local HITM accesses for given offset within cacheline
Store Refs - L1 Hit, L1 Miss
- % of store accesses that hit/missed L1 for given offset within cacheline
Data address - Offset
- offset address
Pid
- pid of the process responsible for the accesses
Tid
- tid of the process responsible for the accesses
Code address
- code address responsible for the accesses
cycles - rmt hitm, lcl hitm, load
- sum of cycles for given accesses - Remote/Local HITM and generic load
cpu cnt
- number of cpus that participated on the access
Symbol
- code symbol related to the 'Code address' value
Shared Object
- shared object name related to the 'Code address' value
Source:Line
- source information related to the 'Code address' value
Node
- nodes participating on the access (see NODE INFO section)
NODE INFO
The Node field displays nodes that accesses given cacheline offset. Its
output comes in 3 flavors: - node IDs separated by , - node IDs with
stats for each ID, in following format: Node{cpus %hitms %stores} -
node IDs with list of affected CPUs in following format: Node{cpu list}
User can switch between above flavors with -N option or use n key to
interactively switch in TUI mode.
COALESCE
User can specify how to sort offsets for cacheline.
Following fields are available and governs the final output fields set
for cacheline offsets output:
tid - coalesced by process TIDs
pid - coalesced by process PIDs
iaddr - coalesced by code address, following fields are displayed:
Code address, Code symbol, Shared Object, Source line
dso - coalesced by shared object
By default the coalescing is setup with pid,iaddr.
STDIO OUTPUT
The stdio output displays data on standard output.
Following tables are displayed: Trace Event Information - overall
statistics of memory accesses
Global Shared Cache Line Event Information
- overall statistics on shared cachelines
Shared Data Cache Line Table
- list of most expensive cachelines
Shared Cache Line Distribution Pareto
- list of all accessed offsets for each cacheline
TUI OUTPUT
The TUI output provides interactive interface to navigate through
cachelines list and to display offset details.
For details please refer to the help window by pressing ? key.
CREDITS
Although Don Zickus, Dick Fowles and Joe Mario worked together to get
this implemented, we got lots of early help from Arnaldo Carvalho de
Melo, Stephane Eranian, Jiri Olsa and Andi Kleen.
C2C BLOG
Check Joe’s blog on c2c tool for detailed use case explanation:
https://joemario.github.io/blog/2016/09/01/c2c-blog/
SEE ALSO
perf-record(1), perf-mem(1)
perf 12/18/2024 PERF-C2C(1)
Generated by dwww version 1.14 on Thu Jan 23 05:37:22 CET 2025.