ExtUti...Install(3perl) Perl Programmers Reference GuideExtUti...Install(3perl)
NAME
ExtUtils::Install - install files from here to there
SYNOPSIS
use ExtUtils::Install;
install({ 'blib/lib' => 'some/install/dir' } );
uninstall($packlist);
pm_to_blib({ 'lib/Foo/Bar.pm' => 'blib/lib/Foo/Bar.pm' });
VERSION
2.22
DESCRIPTION
Handles the installing and uninstalling of perl modules, scripts, man
pages, etc...
Both install() and uninstall() are specific to the way
ExtUtils::MakeMaker handles the installation and deinstallation of perl
modules. They are not designed as general purpose tools.
On some operating systems such as Win32 installation may not be possible
until after a reboot has occurred. This can have varying consequences:
removing an old DLL does not impact programs using the new one, but if a
new DLL cannot be installed properly until reboot then anything
depending on it must wait. The package variable
$ExtUtils::Install::MUST_REBOOT
is used to store this status.
If this variable is true then such an operation has occurred and
anything depending on this module cannot proceed until a reboot has
occurred.
If this value is defined but false then such an operation has occurred,
but should not impact later operations.
Functions
install
# deprecated forms
install(\%from_to);
install(\%from_to, $verbose, $dry_run, $uninstall_shadows,
$skip, $always_copy, \%result);
# recommended form as of 1.47
install([
from_to => \%from_to,
verbose => 1,
dry_run => 0,
uninstall_shadows => 1,
skip => undef,
always_copy => 1,
result => \%install_results,
]);
Copies each directory tree of %from_to to its corresponding value
preserving timestamps and permissions.
There are two keys with a special meaning in the hash: "read" and
"write". These contain packlist files. After the copying is done,
install() will write the list of target files to $from_to{write}. If
$from_to{read} is given the contents of this file will be merged into
the written file. The read and the written file may be identical, but on
AFS it is quite likely that people are installing to a different
directory than the one where the files later appear.
If $verbose is true, will print out each file removed. Default is
false. This is "make install VERBINST=1". $verbose values going up to 5
show increasingly more diagnostics output.
If $dry_run is true it will only print what it was going to do without
actually doing it. Default is false.
If $uninstall_shadows is true any differing versions throughout @INC
will be uninstalled. This is "make install UNINST=1"
As of 1.37_02 install() supports the use of a list of patterns to filter
out files that shouldn't be installed. If $skip is omitted or undefined
then install will try to read the list from INSTALL.SKIP in the CWD.
This file is a list of regular expressions and is just like the
MANIFEST.SKIP file used by ExtUtils::Manifest.
A default site INSTALL.SKIP may be provided by setting then environment
variable EU_INSTALL_SITE_SKIPFILE, this will only be used when there
isn't a distribution specific INSTALL.SKIP. If the environment variable
EU_INSTALL_IGNORE_SKIP is true then no install file filtering will be
performed.
If $skip is undefined then the skip file will be autodetected and used
if it is found. If $skip is a reference to an array then it is assumed
the array contains the list of patterns, if $skip is a true non
reference it is assumed to be the filename holding the list of patterns,
any other value of $skip is taken to mean that no install filtering
should occur.
Changes As of Version 1.47
As of version 1.47 the following additions were made to the install
interface. Note that the new argument style and use of the %result hash
is recommended.
The $always_copy parameter which when true causes files to be updated
regardless as to whether they have changed, if it is defined but false
then copies are made only if the files have changed, if it is undefined
then the value of the environment variable EU_INSTALL_ALWAYS_COPY is
used as default.
The %result hash will be populated with the various keys/subhashes
reflecting the install. Currently these keys and their structure are:
install => { $target => $source },
install_fail => { $target => $source },
install_unchanged => { $target => $source },
install_filtered => { $source => $pattern },
uninstall => { $uninstalled => $source },
uninstall_fail => { $uninstalled => $source },
where $source is the filespec of the file being installed. $target is
where it is being installed to, and $uninstalled is any shadow file that
is in @INC or $ENV{PERL5LIB} or other standard locations, and $pattern
is the pattern that caused a source file to be skipped. In future more
keys will be added, such as to show created directories, however this
requires changes in other modules and must therefore wait.
These keys will be populated before any exceptions are thrown should
there be an error.
Note that all updates of the %result are additive, the hash will not be
cleared before use, thus allowing status results of many installs to be
easily aggregated.
NEW ARGUMENT STYLE
If there is only one argument and it is a reference to an array then the
array is assumed to contain a list of key-value pairs specifying the
options. In this case the option "from_to" is mandatory. This style
means that you do not have to supply a cryptic list of arguments and can
use a self documenting argument list that is easier to understand.
This is now the recommended interface to install().
RETURN
If all actions were successful install will return a hashref of the
results as described above for the $result parameter. If any action is a
failure then install will die, therefore it is recommended to pass in
the $result parameter instead of using the return value. If the result
parameter is provided then the returned hashref will be the passed in
hashref.
install_default
DISCOURAGED
install_default();
install_default($fullext);
Calls install() with arguments to copy a module from blib/ to the
default site installation location.
$fullext is the name of the module converted to a directory (ie.
Foo::Bar would be Foo/Bar). If $fullext is not specified, it will
attempt to read it from @ARGV.
This is primarily useful for install scripts.
NOTE This function is not really useful because of the hard-coded
install location with no way to control site vs core vs vendor
directories and the strange way in which the module name is given.
Consider its use discouraged.
uninstall
uninstall($packlist_file);
uninstall($packlist_file, $verbose, $dont_execute);
Removes the files listed in a $packlist_file.
If $verbose is true, will print out each file removed. Default is
false.
If $dont_execute is true it will only print what it was going to do
without actually doing it. Default is false.
pm_to_blib
pm_to_blib(\%from_to);
pm_to_blib(\%from_to, $autosplit_dir);
pm_to_blib(\%from_to, $autosplit_dir, $filter_cmd);
Copies each key of %from_to to its corresponding value efficiently. If
an $autosplit_dir is provided, all .pm files will be autosplit into it.
Any destination directories are created.
$filter_cmd is an optional shell command to run each .pm file through
prior to splitting and copying. Input is the contents of the module,
output the new module contents.
You can have an environment variable PERL_INSTALL_ROOT set which will be
prepended as a directory to each installed file (and directory).
By default verbose output is generated, setting the PERL_INSTALL_QUIET
environment variable will silence this output.
ENVIRONMENT
PERL_INSTALL_ROOT
Will be prepended to each install path.
EU_INSTALL_IGNORE_SKIP
Will prevent the automatic use of INSTALL.SKIP as the install skip
file.
EU_INSTALL_SITE_SKIPFILE
If there is no INSTALL.SKIP file in the make directory then this
value can be used to provide a default.
EU_INSTALL_ALWAYS_COPY
If this environment variable is true then normal install processes
will always overwrite older identical files during the install
process.
Note that the alias EU_ALWAYS_COPY will be supported if
EU_INSTALL_ALWAYS_COPY is not defined until at least the 1.50
release. Please ensure you use the correct EU_INSTALL_ALWAYS_COPY.
AUTHOR
Original author lost in the mists of time. Probably the same as
Makemaker.
Production release currently maintained by demerphq "yves at cpan.org",
extensive changes by Michael G. Schwern.
Send bug reports via http://rt.cpan.org/. Please send your generated
Makefile along with your report.
LICENSE
This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
See <http://www.perl.com/perl/misc/Artistic.html>
perl v5.40.1 2026-08-30 ExtUti...Install(3perl)
Generated by dwww version 1.16 on Sat Oct 3 07:41:03 CEST 2026.