Scrollbar(3pm) User Contributed Perl Documentation Scrollbar(3pm)
NAME
Tk::Scrollbar - Create and manipulate Scrollbar widgets
SYNOPSIS
$scrollbar = $parent->Scrollbar(?options?);
STANDARD OPTIONS
-activebackground -highlightbackground -orient -takefocus
-background -highlightcolor -relief -troughcolor
-borderwidth -highlightthickness -repeatdelay
-cursor -jump -repeatinterval
See Tk::options for details of the standard options.
WIDGET-SPECIFIC OPTIONS
Name: activeRelief
Class: ActiveRelief
Switch: -activerelief
Specifies the relief to use when displaying the element that is
active, if any. Elements other than the active element are always
displayed with a raised relief.
Name: command
Class: Command
Switch: -command
Specifies a callback to invoke to change the view in the widget
associated with the scrollbar. When a user requests a view change
by manipulating the scrollbar, the callback is invoked. The
callback is passed additional arguments as described later. This
option almost always has a value such as [xview => $widget] or
[yview => $widget], consisting of the a widget object and either
xview (if the scrollbar is for horizontal scrolling) or yview (for
vertical scrolling). All scrollable widgets have xview and yview
methods that take exactly the additional arguments appended by the
scrollbar as described in "SCROLLING COMMANDS" below.
Name: elementBorderWidth
Class: BorderWidth
Switch: -elementborderwidth
Specifies the width of borders drawn around the internal elements of
the scrollbar (the two arrows and the slider). The value may have
any of the forms acceptable to Tk_GetPixels. If this value is less
than zero, the value of the borderWidth option is used in its place.
Name: width
Class: Width
Switch: -width
Specifies the desired narrow dimension of the scrollbar window, not
including 3-D border, if any. For vertical scrollbars this will be
the width and for horizontal scrollbars this will be the height.
The value may have any of the forms acceptable to Tk_GetPixels.
DESCRIPTION
The Scrollbar method creates a new window (given by the $widget
argument) and makes it into a scrollbar widget. Additional options,
described above, may be specified on the command line or in the option
database to configure aspects of the scrollbar such as its colors,
orientation, and relief. The scrollbar command returns its $widget
argument. At the time this command is invoked, there must not exist a
window named $widget, but $widget's parent must exist.
A scrollbar is a widget that displays two arrows, one at each end of the
scrollbar, and a slider in the middle portion of the scrollbar. It
provides information about what is visible in an associated window that
displays an document of some sort (such as a file being edited or a
drawing). The position and size of the slider indicate which portion of
the document is visible in the associated window. For example, if the
slider in a vertical scrollbar covers the top third of the area between
the two arrows, it means that the associated window displays the top
third of its document.
Scrollbars can be used to adjust the view in the associated window by
clicking or dragging with the mouse. See "BINDINGS" below for details.
ELEMENTS
A scrollbar displays five elements, which are referred to in the methods
for the scrollbar:
arrow1
The top or left arrow in the scrollbar.
trough1
The region between the slider and arrow1.
slider
The rectangle that indicates what is visible in the associated
widget.
trough2
The region between the slider and arrow2.
arrow2
The bottom or right arrow in the scrollbar.
WIDGET METHODS
The Scrollbar method creates a widget object. This object supports the
configure and cget methods described in Tk::options which can be used to
enquire and modify the options described above. The widget also
inherits all the methods provided by the generic Tk::Widget class.
The following additional methods are available for scrollbar widgets:
$scrollbar->activate(?element?)
Marks the element indicated by element as active, which causes it to
be displayed as specified by the activeBackground and activeRelief
options. The only element values understood by this command are
arrow1, slider, or arrow2. If any other value is specified then no
element of the scrollbar will be active. If element is not
specified, the command returns the name of the element that is
currently active, or an empty string if no element is active.
$scrollbar->delta(deltaX, deltaY)
Returns a real number indicating the fractional change in the
scrollbar setting that corresponds to a given change in slider
position. For example, if the scrollbar is horizontal, the result
indicates how much the scrollbar setting must change to move the
slider deltaX pixels to the right (deltaY is ignored in this case).
If the scrollbar is vertical, the result indicates how much the
scrollbar setting must change to move the slider deltaY pixels down.
The arguments and the result may be zero or negative.
$scrollbar->fraction(x, y)
Returns a real number between 0 and 1 indicating where the point
given by x and y lies in the trough area of the scrollbar. The
value 0 corresponds to the top or left of the trough, the value 1
corresponds to the bottom or right, 0.5 corresponds to the middle,
and so on. X and y must be pixel coordinates relative to the
scrollbar widget. If x and y refer to a point outside the trough,
the closest point in the trough is used.
$scrollbar->get
Returns the scrollbar settings in the form of a list whose elements
are the arguments to the most recent set method.
$scrollbar->identify(x, y)
Returns the name of the element under the point given by x and y
(such as arrow1), or an empty string if the point does not lie in
any element of the scrollbar. X and y must be pixel coordinates
relative to the scrollbar widget.
$scrollbar->set(first, last)
This command is invoked by the scrollbar's associated widget to tell
the scrollbar about the current view in the widget. The command
takes two arguments, each of which is a real fraction between 0 and
1. The fractions describe the range of the document that is visible
in the associated widget. For example, if first is 0.2 and last is
0.4, it means that the first part of the document visible in the
window is 20% of the way through the document, and the last visible
part is 40% of the way through.
SCROLLING COMMANDS
When the user interacts with the scrollbar, for example by dragging the
slider, the scrollbar notifies the associated widget that it must change
its view. The scrollbar makes the notification by evaluating a callback
specified as the scrollbar's -command option. The callback may take
several forms. In each case, the initial arguments passed are those
specified in the -command callback itself, which usually has a form like
[yview => $widget]. (Which will invoke $widget->yview(...) where the
... part is as below. See Tk::callbacks for details.) The callback is
passed additional arguments as follows:
moveto,fraction
Fraction is a real number between 0 and 1. The widget should adjust
its view so that the point given by fraction appears at the
beginning of the widget. If fraction is 0 it refers to the
beginning of the document. 1.0 refers to the end of the document,
0.333 refers to a point one-third of the way through the document,
and so on.
scroll,number,units
The widget should adjust its view by number units. The units are
defined in whatever way makes sense for the widget, such as
characters or lines in a text widget. Number is either 1, which
means one unit should scroll off the top or left of the window, or
-1, which means that one unit should scroll off the bottom or right
of the window.
scroll,number,page
The widget should adjust its view by number pages. It is up to the
widget to define the meaning of a page; typically it is slightly
less than what fits in the window, so that there is a slight overlap
between the old and new views. Number is either 1, which means the
next page should become visible, or -1, which means that the
previous page should become visible.
OLD COMMAND SYNTAX
In versions of Tk before 4.0, the set and get widget commands used a
different form. This form is still supported for backward
compatibility, but it is deprecated. In the old command syntax, the set
method has the following form:
$scrollbar->set(totalUnits, windowUnits, firstUnit, lastUnit)
In this form the arguments are all integers. TotalUnits gives the
total size of the object being displayed in the associated widget.
The meaning of one unit depends on the associated widget; for
example, in a text editor widget units might correspond to lines of
text. WindowUnits indicates the total number of units that can fit
in the associated window at one time. FirstUnit and lastUnit give
the indices of the first and last units currently visible in the
associated window (zero corresponds to the first unit of the
object).
Under the old syntax the get method returns a list of four integers,
consisting of the totalUnits, windowUnits, firstUnit, and lastUnit
values from the last set method.
The callbacks generated by scrollbars also have a different form when
the old syntax is being used, the callback is passed a single argument:
unit
Unit is an integer that indicates what should appear at the top or
left of the associated widget's window. It has the same meaning as
the firstUnit and lastUnit arguments to the set method.
The most recent set method determines whether or not to use the old
syntax. If it is given two real arguments then the new syntax will be
used in the future, and if it is given four integer arguments then the
old syntax will be used.
BINDINGS
Tk automatically creates class bindings for scrollbars that give them
the following default behavior. If the behavior is different for
vertical and horizontal scrollbars, the horizontal behavior is described
in parentheses.
[1] Pressing button 1 over arrow1 causes the view in the associated
widget to shift up (left) by one unit so that the document appears
to move down (right) one unit. If the button is held down, the
action auto-repeats.
[2] Pressing button 1 over trough1 causes the view in the associated
widget to shift up (left) by one screenful so that the document
appears to move down (right) one screenful. If the button is held
down, the action auto-repeats.
[3] Pressing button 1 over the slider and dragging causes the view to
drag with the slider. If the jump option is true, then the view
doesn't drag along with the slider; it changes only when the mouse
button is released.
[4] Pressing button 1 over trough2 causes the view in the associated
widget to shift down (right) by one screenful so that the document
appears to move up (left) one screenful. If the button is held
down, the action auto-repeats.
[5] Pressing button 1 over arrow2 causes the view in the associated
widget to shift down (right) by one unit so that the document
appears to move up (left) one unit. If the button is held down, the
action auto-repeats.
[6] If button 2 is pressed over the trough or the slider, it sets the
view to correspond to the mouse position; dragging the mouse with
button 2 down causes the view to drag with the mouse. If button 2
is pressed over one of the arrows, it causes the same behavior as
pressing button 1.
[7] If button 1 is pressed with the Control key down, then if the mouse
is over arrow1 or trough1 the view changes to the very top (left) of
the document; if the mouse is over arrow2 or trough2 the view
changes to the very bottom (right) of the document; if the mouse is
anywhere else then the button press has no effect.
[8] In vertical scrollbars the Up and Down keys have the same behavior
as mouse clicks over arrow1 and arrow2, respectively. In horizontal
scrollbars these keys have no effect.
[9] In vertical scrollbars Control-Up and Control-Down have the same
behavior as mouse clicks over trough1 and trough2, respectively. In
horizontal scrollbars these keys have no effect.
[10]
In horizontal scrollbars the Up and Down keys have the same behavior
as mouse clicks over arrow1 and arrow2, respectively. In vertical
scrollbars these keys have no effect.
[11]
In horizontal scrollbars Control-Up and Control-Down have the same
behavior as mouse clicks over trough1 and trough2, respectively. In
vertical scrollbars these keys have no effect.
[12]
The Prior and Next keys have the same behavior as mouse clicks over
trough1 and trough2, respectively.
[13]
The Home key adjusts the view to the top (left edge) of the
document.
[14]
The End key adjusts the view to the bottom (right edge) of the
document.
SEE ALSO
Tk::callbacks Tk::Scrolled
KEYWORDS
scrollbar, widget
perl v5.40.1 2025-04-13 Scrollbar(3pm)
Generated by dwww version 1.16 on Sat Oct 3 07:36:07 CEST 2026.