clamd.conf(5) Clam AntiVirus clamd.conf(5)
NAME
clamd.conf - Configuration file for Clam AntiVirus Daemon
DESCRIPTION
clamd.conf configures the Clam AntiVirus daemon, clamd(8).
FILE FORMAT
The file consists of comments and options with arguments. Each line
which starts with a hash (#) symbol is ignored by the parser. Options
and arguments are case sensitive and of the form Option Argument. The
arguments are of the following types:
BOOL Boolean value (yes/no or true/false or 1/0).
STRING String without blank characters.
SIZE Size in bytes. You can use 'M' or 'm' modifiers for megabytes
and 'K' or 'k' for kilobytes. To specify the size in bytes just
don't use modifiers.
NUMBER Unsigned integer.
DIRECTIVES
When some option is not used (commented out or not included in the con-
figuration file at all) clamd takes a default action.
Example
If this option is set clamd will not run.
LogFile STRING
Save all reports to a log file.
Default: disabled
LogFileUnlock BOOL
By default the log file is locked for writing and only a single
daemon process can write to it. This option disables the lock.
Default: no
LogFileMaxSize SIZE
Maximum size of the log file.
Value of 0 disables the limit.
Default: 1048576
LogTime BOOL
Log time for each message.
Default: no
LogClean BOOL
Log all clean files.
Useful in debugging but drastically increases the log size.
Default: no
LogSyslog BOOL
Use the system logger (can work together with LogFile).
Default: no
LogFacility STRING
Type of syslog messages
Please refer to 'man syslog' for facility names.
Default: LOG_LOCAL6
LogVerbose BOOL
Enable verbose logging.
Default: no
LogRotate BOOL
Rotate log file. Requires LogFileMaxSize option set prior to
this option.
Default: no
ExtendedDetectionInfo BOOL
Log additional information about the infected file, such as its
size and hash, together with the virus name.
Default: no
PidFile STRING
Write the daemon's pid to the specified file.
Default: disabled
TemporaryDirectory STRING
This option allows you to change the default temporary direc-
tory.
Default: system specific (usually /tmp or /var/tmp).
DatabaseDirectory STRING
This option allows you to change the default database directory.
If you enable it, please make sure it points to the same direc-
tory in both clamd and freshclam.
Default: defined at configuration (/usr/local/share/clamav)
CVDCertsDirectory STRING
Path to a directory containing ClamAV CA certificate files used
to verify signed database archives (e.g. CVD files). This di-
rectory must already exist, be an absolute path, be readable by
freshclam, clamd, clamscan, and sigtool.
Default: /etc/clamav/certs
FIPSCryptoHashLimits BOOL
Enforce FIPS-like limits on using hash algorithms for crypto-
graphic purposes. Will disable MD5 & SHA1 FP sigs and will re-
quire '.sign' files to verify CVD authenticity.
Default: no
OfficialDatabaseOnly BOOL
Only load the official signatures published by the ClamAV
project.
Default: no
FailIfCvdOlderThan NUMBER
Return with a nonzero error code if the virus database is older
than the specified number of days.
Default: -1
LocalSocket STRING
Path to a local (Unix) socket the daemon will listen on.
Default: disabled
LocalSocketGroup STRING
Sets the group ownership on the unix socket.
Default: the primary group of the user running clamd
LocalSocketMode STRING
Sets the permissions on the unix socket to the specified mode.
Default: socket is world readable and writable
FixStaleSocket BOOL
Remove stale socket after unclean shutdown.
Default: yes
TCPSocket NUMBER
TCP port number the daemon will listen on.
Default: disabled
TCPAddr STRING
By default clamd binds to INADDR_ANY.
This option allows you to restrict the TCP address and provide
some degree of protection from the outside world. This option
can be specified multiple times in order to listen on multiple
IPs. IPv6 is now supported.
Default: disabled
EnableShutdownCommand BOOL
Enables the SHUTDOWN command. Setting this to no prevents a
client to stop clamd via the protocol.
When disabled, clamd responds to this command with COMMAND UN-
AVAILABLE.
Default: yes
EnableReloadCommand BOOL
Enables the RELOAD command. Setting this to no prevents a client
to reload the database.
When disabled, clamd responds to this command with COMMAND UN-
AVAILABLE.
Default: yes
EnableVersionCommand BOOL
Enables the VERSION command. Setting this to no prevents a
client from querying version information.
When disabled, clamd responds to this command with COMMAND UN-
AVAILABLE.
Default: yes
EnableStatsCommand BOOL
Enables the STATS command. Setting this to no prevents a client
from querying statistics.
When disabled, clamd responds to this command with COMMAND UN-
AVAILABLE.
Default: yes
MaxConnectionQueueLength NUMBER
Maximum length the queue of pending connections may grow to.
Default: 200
StreamMaxLength SIZE
Close the STREAM session when the data size limit is exceeded.
The value should match your MTA's limit for the maximum attach-
ment size.
Default: 100M
StreamMinPort NUMBER
The STREAM command uses an FTP-like protocol.
This option sets the lower boundary for the port range.
Default: 1024
StreamMaxPort NUMBER
This option sets the upper boundary for the port range.
Default: 2048
MaxThreads NUMBER
Maximum number of threads running at the same time.
Default: 10
ReadTimeout NUMBER
This option specifies the time (in seconds) after which clamd
should timeout if a client doesn't provide any data.
Default: 120
CommandReadTimeout NUMBER
This option specifies the time (in seconds) after which clamd
should timeout if a client doesn't provide any initial command
after connecting. The default is set to 30 to avoid timeouts
with TCP sockets when processing large messages. If using a
Unix socket, the value can be changed to 5. Note: the timeout
for subsequents commands, and/or data chunks is specified by
ReadTimeout.
Default: 30
SendBufTimeout NUMBER
This option specifies how long to wait (in milliseconds) if the
send buffer is full. Keep this value low to prevent clamd hang-
ing.
Default: 500
MaxQueue NUMBER
Maximum number of queued items (including those being processed
by MaxThreads threads). It is recommended to have this value at
least twice MaxThreads if possible.
WARNING: you shouldn't increase this too much to avoid running
out of file descriptors, the following condition should hold:
MaxThreads*MaxRecursion + MaxQueue - MaxThreads + 6 <
RLIMIT_NOFILE. RLIMIT_NOFILE is the maximum number of open file
descriptors (usually 1024), set by ulimit -n.
Default: 100
IdleTimeout NUMBER
This option specifies how long (in seconds) the process should
wait for a new job.
Default: 30
ExcludePath REGEX
Don't scan files and directories matching REGEX. This directive
can be used multiple times.
Default: disabled
MaxDirectoryRecursion NUMBER
Maximum depth directories are scanned at.
Default: 15
FollowDirectorySymlinks BOOL
Follow directory symlinks.
Default: no
CrossFilesystems BOOL
Scan files and directories on other filesystems.
Default: yes
FollowFileSymlinks BOOL
Follow regular file symlinks.
Default: no
SelfCheck NUMBER
This option specifies the time intervals (in seconds) in which
clamd should perform a database check.
Default: 600
ConcurrentDatabaseReload BOOL
Enable non-blocking (multi-threaded/concurrent) database
reloads. This feature will temporarily load a second scanning
engine while scanning continues using the first engine. Once
loaded, the new engine takes over. The old engine is removed as
soon as all scans using the old engine have completed. This fea-
ture requires more RAM, so this option is provided in case users
are willing to block scans during reload in exchange for lower
RAM requirements.
Default: yes
VirusEvent COMMAND
Execute a command when virus is found. Use the following envi-
ronment variables to identify the file and virus names: -
$CLAM_VIRUSEVENT_FILENAME - $CLAM_VIRUSEVENT_VIRUSNAME In the
command string, '%v' will also be replaced with the virus name.
Note: The '%f' filename format character has been disabled and
will no longer be replaced with the file name, due to command
injection security concerns. Use the 'CLAM_VIRUSEVENT_FILENAME'
environment variable instead. For the same reason, you should
NOT use the environment variables in the command directly, but
should use it carefully from your executed script.
Default: disabled
ExitOnOOM BOOL
Stop daemon when libclamav reports out of memory condition.
Default: no
AllowAllMatchScan BOOL
Permit use of the ALLMATCHSCAN command.
Default: yes
Foreground BOOL
Don't fork into background.
Default: no
Debug BOOL
Enable debug messages from libclamav.
Default: no
LeaveTemporaryFiles BOOL
Do not remove temporary files (for debugging purpose).
Default: no
GenerateMetadataJson BOOL
Record metadata about the file being scanned. Scan metadata is
useful for file analysis purposes and for debugging scan behav-
ior. The JSON metadata will be printed after the scan is com-
plete if Debug is enabled. A metadata.json file will be written
to the scan temp directory if LeaveTemporaryFiles is enabled.
Default: no
JsonStoreHTMLURIs BOOL
Store URIs found in html files to the json metadata. URIs will
be stored in an array with the tag 'URIs'. GenerateMetadataJson
is required for this feature.
Default: yes (if GenerateMetadataJson is used)
JsonStorePDFURIs BOOL
Store URIs found in pdf files to the json metadata. URIs will
be stored in an array with the tag 'URIs'. GenerateMetadataJson
is required for this feature.
Default: yes (if GenerateMetadataJson is used)
JsonStoreExtraHashes BOOL
Calculate MD5 and SHA1 hashes (in addition to SHA2-256) and
store to the json metadata. GenerateMetadataJson is required
for this feature.
Default: no
User STRING
Run the daemon as a specified user (the process must be started
by root).
Default: disabled
Bytecode BOOL
With this option enabled ClamAV will load bytecode from the
database. It is highly recommended you keep this option turned
on, otherwise you may miss detections for many new viruses.
Default: yes
BytecodeSecurity STRING
Set bytecode security level.
Possible values:
TrustSigned - trust bytecode loaded from signed .c[lv]d
files and insert runtime safety checks for bytecode loaded
from other sources,
Paranoid - don't trust any bytecode, insert runtime checks
for all.
Recommended: TrustSigned, because bytecode in .cvd files already
has these checks.
Default: TrustSigned
BytecodeTimeout NUMBER
Set bytecode timeout in milliseconds.
Default: 10000
BytecodeUnsigned BOOL
Allow loading bytecode from outside digitally signed .c[lv]d
files. **Caution**: You should NEVER run bytecode signatures
from untrusted sources. Doing so may result in arbitrary code
execution.
Default: no
BytecodeMode STRING
Set bytecode execution mode.
Possible values:
Auto - automatically choose JIT if possible, fallback to in-
terpreter
ForceJIT - always choose JIT, fail if not possible
ForceInterpreter - always choose interpreter
Test - run with both JIT and interpreter and compare re-
sults. Make all failures fatal.
Default: Auto
DetectPUA BOOL
Detect Possibly Unwanted Applications.
Default: No
ExcludePUA CATEGORY
Exclude a specific PUA category. This directive can be used mul-
tiple times. See https://docs.clamav.net/faq/faq-pua.html for
the complete list of PUA categories.
Default: disabled
IncludePUA CATEGORY
Only include a specific PUA category. This directive can be used
multiple times. See https://docs.clamav.net/faq/faq-pua.html for
the complete list of PUA categories.
Default: disabled
HeuristicAlerts BOOL
In some cases (eg. complex malware, exploits in graphic files,
and others), ClamAV uses special algorithms to provide accurate
detection. This option controls the algorithmic detection.
Default: yes
HeuristicScanPrecedence BOOL
Allow heuristic match to take precedence. When enabled, if a
heuristic scan (such as phishingScan) detects a possible
virus/phishing it will stop scanning immediately. Recommended,
saves CPU scan-time. When disabled, virus/phishing detected by
heuristic scans will be reported only at the end of a scan. If
an archive contains both a heuristically detected virus/phish-
ing, and a real malware, the real malware will be reported. Keep
this disabled if you intend to handle "*.Heuristics.*" viruses
differently from "real" malware. If a non-heuristically-detected
virus (signature-based) is found first, the scan is interrupted
immediately, regardless of this config option.
Default: no
ScanPE BOOL
PE stands for Portable Executable - it's an executable file for-
mat used in all 32 and 64-bit versions of Windows operating sys-
tems. This option allows ClamAV to perform a deeper analysis of
executable files and it's also required for decompression of
popular executable packers such as UPX.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanELF BOOL
Executable and Linking Format is a standard format for UN*X exe-
cutables. This option allows you to control the scanning of ELF
files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanMail BOOL
Enable scanning of mail files.
If you turn off this option, the original files will still be
scanned, but without parsing individual messages/attachments.
Default: yes
ScanPartialMessages BOOL
Scan RFC1341 messages split over many emails. You will need to
periodically clean up $TemporaryDirectory/clamav-partial direc-
tory. WARNING: This option may open your system to a DoS attack.
Never use it on loaded servers.
Default: no
PhishingSignatures BOOL
Enable email signature-based phishing detection.
Default: yes
PhishingScanURLs BOOL
Enable URL signature-based phishing detection (Heuristics.Phish-
ing.Email.*)
Default: yes
StructuredDataDetection BOOL
Enable the DLP module.
Default: no
StructuredMinCreditCardCount NUMBER
This option sets the lowest number of Credit Card numbers found
in a file to generate a detect.
Default: 3
StructuredCCOnly BOOL
With this option enabled the DLP module will search for valid
Credit Card0umbers only. Debit and Private Label cards will not
be searched.
Default: No
StructuredMinSSNCount NUMBER
This option sets the lowest number of Social Security Numbers
found in a file to generate a detect.
Default: 3
StructuredSSNFormatNormal BOOL
With this option enabled the DLP module will search for valid
SSNs formatted as xxx-yy-zzzz.
Default: Yes
StructuredSSNFormatStripped BOOL
With this option enabled the DLP module will search for valid
SSNs formatted as xxxyyzzzz.
Default: No
ScanHTML BOOL
Perform HTML/JavaScript/ScriptEncoder normalisation and decryp-
tion.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanOLE2 BOOL
This option enables scanning of OLE2 files, such as Microsoft
Office documents and .msi files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanPDF BOOL
This option enables scanning within PDF files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanSWF BOOL
This option enables scanning within SWF files.
If you turn off this option, the original files will still be
scanned, but without decoding and additional processing.
Default: yes
ScanXMLDOCS BOOL
This option enables scanning xml-based document files supported
by libclamav.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanHWP3 BOOL
This option enables scanning HWP3 files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanOneNote BOOL
This option enables scanning OneNote files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanArchive BOOL
Scan within archives and compressed files.
If you turn off this option, the original files will still be
scanned, but without unpacking and additional processing.
Default: yes
ScanImage BOOL
This option enables scanning of image (graphics).
If you turn off this option, the original files will still be
scanned, but without unpacking and additional processing.
Default: yes
ScanImageFuzzyHash BOOL
This option enables detection by calculating a fuzzy hash of im-
age (graphics) files. Signatures using image fuzzy hashes typi-
cally match files and documents by identifying images embedded
or attached to those files.
If you turn off this option, then some files may no longer be
detected.
Default: yes
AlertBrokenExecutables BOOL
Alert on broken executable files (PE & ELF).
Default: no
AlertBrokenMedia BOOL
Alert on broken graphics files (JPEG, TIFF, PNG, GIF).
Default: no
AlertEncrypted BOOL
Alert on encrypted archives and documents (encrypted .zip,
.7zip, .rar, .pdf).
Default: no
AlertEncryptedArchive BOOL
Alert on encrypted archives (encrypted .zip, .7zip, .rar).
Default: no
AlertEncryptedDoc BOOL
Alert on encrypted documents (encrypted .pdf).
Default: no
AlertOLE2Macros BOOL
Alert on OLE2 files containing VBA macros (Heuristics.OLE2.Con-
tainsMacros).
Default: no
AlertExceedsMax BOOL
When AlertExceedsMax is set, files exceeding the MaxFileSize,
MaxScanSize, or MaxRecursion limit will be flagged with the
virus name starting with "Heuristics.Limits.Exceeded".
Default: no
AlertPhishingSSLMismatch BOOL
Alert on emails containing SSL mismatches in URLs (might lead to
false positives!).
Default: no
AlertPhishingCloak BOOL
Alert on emails containing cloaked URLs (might lead to some
false positives).
Default: no
AlertPartitionIntersection BOOL
Alert on raw DMG image files containing partition intersections.
Default: no
DisableCache
This option allows you to disable the caching feature of the en-
gine.
By default, the engine will store an MD5 in a cache of any files
that are not flagged as virus or that hit limits checks. Warn-
ing: Disabling the cache will have a negative performance impact
on large scans.
Default: no
CacheSize
This option allows you to set the number of entries the cache
can store. The value should be a square number or will be
rounded up to the nearest square number.
Default: 65536
ForceToDisk
This option causes memory or nested map scans to dump the con-
tent to disk.
If you turn on this option, more data is written to disk and is
available when the leave-temps option is enabled at the cost of
more disk writes.
Default: no
MaxScanTime SIZE
This option sets the maximum amount of time a scan may take to
complete. The value is in milliseconds. The value of 0 disables
the limit. WARNING: disabling this limit or setting it too high
may result allow scanning of certain files to lock up the scan-
ning process/threads resulting in a Denial of Service.
Default: 120000
MaxScanSize SIZE
Sets the maximum amount of data to be scanned for each input
file. Archives and other containers are recursively extracted
and scanned up to this value. The size of an archive plus the
sum of the sizes of all files within archive count toward the
scan size. For example, a 1M uncompressed archive containing a
single 1M inner file counts as 2M toward the max scan size.
Warning: disabling this limit or setting it too high may result
in severe damage to the system.
Default: 400M
MaxFileSize SIZE
Files larger than this limit won't be scanned. Affects the input
file itself as well as files contained inside it (when the input
file is an archive, a document or some other kind of container).
Warning: disabling this limit or setting it too high may result
in severe damage to the system. Technical design limitations
prevent ClamAV from scanning files greater than 2 GB at this
time.
Default: 100M
MaxRecursion NUMBER
Nested archives are scanned recursively, e.g. if a Zip archive
contains a RAR file, all files within it will also be scanned.
This options specifies how deeply the process should be contin-
ued. Warning: setting this limit too high may result in severe
damage to the system.
Default: 17
MaxFiles NUMBER
Number of files to be scanned within an archive, a document, or
any other kind of container. Warning: disabling this limit or
setting it too high may result in severe damage to the system.
Default: 10000
MaxEmbeddedPE SIZE
This option sets the maximum size of a file to check for embed-
ded PE.
Files larger than this value will skip the additional analysis
step.
Negative values are not allowed.
Default: 40M
MaxHTMLNormalize SIZE
This option sets the maximum size of a HTML file to normalize.
HTML files larger than this value will not be normalized or
scanned.
Negative values are not allowed.
Default: 40M
MaxHTMLNoTags SIZE
This option sets the maximum size of a normalized HTML file to
scan.
HTML files larger than this value after normalization will not
be scanned.
Negative values are not allowed.
Default: 8M
MaxScriptNormalize SIZE
This option sets the maximum size of a script file to normalize.
Script content larger than this value will not be normalized or
scanned.
Negative values are not allowed.
Default: 20M
MaxZipTypeRcg SIZE
This option sets the maximum size of a ZIP file to reanalyze
type recognition.
ZIP files larger than this value will skip the step to poten-
tially reanalyze as PE.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage
or impact performance.
Default: 1M
MaxPartitions SIZE
This option sets the maximum number of partitions of a raw disk
image to be scanned.
Raw disk images with more partitions than this value will have
up to the value partitions scanned.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage
or impact performance.
Default: 50
MaxIconsPE SIZE
This option sets the maximum number of icons within a PE to be
scanned.
PE files with more icons than this value will have up to the
value number icons scanned.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage
or impact performance.
Default: 100
MaxRecHWP3 NUMBER
This option sets the maximum recursive calls to HWP3 parsing
function.
HWP3 files using more than this limit will be terminated and
alert the user.
Scans will be unable to scan any HWP3 attachments if the recur-
sive limit is reached.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage
or impact performance.
Default: 16
PCREMatchLimit NUMBER
This option sets the maximum calls to the PCRE match function
during an instance of regex matching.
Instances using more than this limit will be terminated and
alert the user but the scan will continue.
For more information on match_limit, see the PCRE documentation.
Negative values are not allowed.
WARNING: setting this limit too high may severely impact perfor-
mance.
Default: 10000
PCRERecMatchLimit NUMBER
This option sets the maximum recursive calls to the PCRE match
function during an instance of regex matching.
Instances using more than this limit will be terminated and
alert the user but the scan will continue.
For more information on match_limit_recursion, see the PCRE doc-
umentation.
Negative values are not allowed and values > PCREMatchLimit are
superfluous.
WARNING: setting this limit too high may severely impact perfor-
mance.
Default: 2000
PCREMaxFileSize SIZE
This option sets the maximum filesize for which PCRE subsigs
will be executed.
Files exceeding this limit will not have PCRE subsigs executed
unless a subsig is encompassed to a smaller buffer.
Negative values are not allowed.
Setting this value to zero disables the limit.
WARNING: setting this limit too high or disabling it may se-
verely impact performance.
Default: 100M
OnAccessIncludePath STRING
This option specifies a directory (including all files and di-
rectories inside it), which should be scanned on access. This
option can be used multiple times.
Default: disabled
OnAccessExcludePath STRING
This option allows excluding directories from on-access scan-
ning. It can be used multiple times.
Default: disabled
OnAccessExcludeRootUID BOOL
With this option you can exclude the root UID (0). Processes run
under root will be able to access all files without triggering
scans or permission denied events.
Note that if clamd cannot check the uid of the process that gen-
erated an on-access scan event (e.g., because OnAccessPrevention
was not enabled, and the process already exited), clamd will
perform a scan. Thus, setting OnAccessExcludeRootUID is not
guaranteed to prevent every access by the root user from trig-
gering a scan (unless OnAccessPrevention is enabled).
Default: no
OnAccessExcludeUID NUMBER
With this option you can exclude specific UIDs. Processes with
these UIDs will be able to access all files without triggering
scans or permission denied events.
This option can be used multiple times (one per line).
Note: using a value of 0 on any line will disable this option
entirely. To exclude the root UID (0) please enable the OnAcces-
sExcludeRootUID option.
Also note that if clamd cannot check the uid of the process that
generated an on-access scan event (e.g., because OnAccessPreven-
tion was not enabled, and the process already exited), clamd
will perform a scan. Thus, setting OnAccessExcludeUID is not
guaranteed to prevent every access by the specified uid from
triggering a scan (unless OnAccessPrevention is enabled).
Default: disabled
OnAccessExcludeUname STRING
This option allows exclusions via user names when using the on-
access scanning client. It can be used multiple times, and has
the same potential race condition limitations of the OnAccessEx-
cludeUID option.
Default: disabled
OnAccessMaxFileSize SIZE
Files larger than this value will not be scanned in on access.
Default: 5M
OnAccessMaxThreads NUMBER
Max number of scanning threads to allocate to the OnAccess
thread pool at startup. These threads are the ones responsible
for creating a connection with the daemon and kicking off scan-
ning after an event has been processed. To prevent clamonacc
from consuming all clamd's resources keep this lower than
clamd's max threads.
Default: 5
OnAccessCurlTimeout NUMBER
Max amount of time (in milliseconds) that the OnAccess client
should spend for every connect, send, and receive attempt when
communicating with clamd via curl.
Default: 5000 (5 seconds)
OnAccessMountPath STRING
Specifies a mount point (including all files and directories un-
der it), which should be scanned on access. This option can be
used multiple times.
Default: disabled
OnAccessDisableDDD BOOL
Disables the dynamic directory determination system which allows
for recursively watching include paths.
Default: no
OnAccessPrevention BOOL
Enables fanotify blocking when malicious files are found.
Default: disabled
OnAccessRetryAttempts NUMBER
Number of times the OnAccess client will retry a failed scan due
to connection problems (or other issues).
Default: 0
OnAccessDenyOnError BOOL
When using prevention, if this option is turned on, any errors
that occur during scanning will result in the event attempt be-
ing denied. This could potentially lead to unwanted system be-
haviour with certain configurations, so the client defaults this
to off and prefers allowing access events in case of scan or
connection error.
Default: no
OnAccessExtraScanning BOOL
Toggles extra scanning and notifications when a file or direc-
tory is created or moved.
Requires the DDD system to kick-off extra scans.
Default: no
DisableCertCheck BOOL
Disable authenticode certificate chain verification in PE files.
Default: no
NOTES
All options expressing a size are limited to max 4GB. Values in excess
will be reset to the maximum.
FILES
/etc/clamav/clamd.conf
AUTHORS
Tomasz Kojm <tkojm@clamav.net>, Kevin Lin <klin@sourcefire.com>
SEE ALSO
clamd(8), clamdscan(1), clamav-milter(8), freshclam(1), fresh-
clam.conf(5)
ClamAV 1.5.3 December 4, 2013 clamd.conf(5)
Generated by dwww version 1.14 on Sat Jul 25 23:13:39 CEST 2026.