dwww Home | Manual pages | Find package

CPUPOWER-SET(1)                 cpupower Manual                 CPUPOWER-SET(1)

NAME
       cpupower-set - Set processor power related kernel or hardware configura-
       tions

SYNOPSIS
       cpupower set [ -b VAL ]

DESCRIPTION
       cpupower  set   sets kernel configurations or directly accesses hardware
       registers affecting processor power saving policies.

       Some options are platform wide, some affect  single  cores.  By  default
       values  are  applied  on all cores. How to modify single core configura-
       tions is described in the cpupower(1) manpage in the --cpu  option  sec-
       tion.  Whether  an  option affects the whole system or can be applied to
       individual cores is described in the Options sections.

       Use cpupower info  to read out current settings  and  whether  they  are
       supported on the system at all.

Options
       --perf-bias, -b
           Sets  a register on supported Intel processore which allows software
           to convey its policy for the relative importance of performance ver-
           sus energy savings to the  processor.

           The range of valid numbers is 0-15, where 0 is  maximum  performance
           and 15 is maximum energy efficiency.

           The  processor  uses this information in model-specific ways when it
           must select trade-offs between performance and energy efficiency.

           This policy hint does not supersede Processor Performance states (P-
           states) or CPU Idle power states (C-states), but allows software  to
           have influence where it would otherwise be unable to express a pref-
           erence.

           For  example, this setting may tell the hardware how aggressively or
           conservatively to control frequency in the "turbo range"  above  the
           explicitly  OS-controlled P-state frequency range.  It may also tell
           the hardware how aggressively it should enter the  OS  requested  C-
           states.

           This  option  can  be applied to individual cores only via the --cpu
           option, cpupower(1).

           Setting the performance bias value on one CPU can modify the setting
           on related CPUs as well (for example all CPUs on  one  socket),  be-
           cause of hardware restrictions.  Use cpupower -c all info -b to ver-
           ify.

           This options needs the msr kernel driver (CONFIG_X86_MSR) loaded.

SEE ALSO
       cpupower-info(1), cpupower-monitor(1), powertop(1)

AUTHORS
       --perf-bias parts written by Len Brown <len.brown@intel.com>
       Thomas Renninger <trenn@suse.de>

                                   22/02/2011                   CPUPOWER-SET(1)

Generated by dwww version 1.16 on Sun Nov 15 06:45:37 CET 2026.