pw-cat(1) General Commands Manual pw-cat(1)
NAME
pw-cat - Play and record media with PipeWire
SYNOPSIS
pw-cat [options] [FILE | -]
pw-play [options] [FILE | -]
pw-record [options] [FILE | -]
pw-midiplay [options] [FILE | -]
pw-midirecord [options] [FILE | -]
pw-dsdplay [options] [FILE | -]
DESCRIPTION
pw-cat is a simple tool for playing back or capturing raw or encoded
media files on a PipeWire server. It understands all audio file formats
supported by libsndfile for PCM capture and playback. When capturing
PCM, the filename extension is used to guess the file format with the
WAV file format as the default.
It understands standard MIDI files for playback and recording. This tool
will not render MIDI files, it will simply make the MIDI events
available to the graph. You need a MIDI renderer such as qsynth,
timidity or a hardware MIDI rendered to hear the MIDI.
DSD playback is supported with the DSF file format. This tool will only
work with native DSD capable hardware and will produce an error when no
such hardware was found.
When the FILE is - input and output will be raw data from STDIN and
STDOUT respectively.
OPTIONS
-h | --help
Show help.
--version
Show version information.
-v | --verbose
Verbose operation.
-R | --remote=NAME
The name the remote instance to connect to. If left unspecified, a
connection is made to the default PipeWire instance.
-p | --playback
Playback mode. Read data from the specified file, and play it back.
If the tool is called under the name pw-play or pw-midiplay this is
the default.
-r | --record
Recording mode. Capture data and write it to the specified file. If
the tool is called under the name pw-record or pw-midirecord this is
the default.
-m | --midi
MIDI mode. FILE is a MIDI file. If the tool is called under the name
pw-midiplay or pw-midirecord this is the default. Note that this
program will not render the MIDI events into audible samples, it
will simply provide the MIDI events in the graph. You need a
separate MIDI renderer such as qsynth, timidity or a hardware
renderer to hear the MIDI.
-d | --dsd
DSD mode. FILE is a DSF file. If the tool is called under the name
pw-dsdplay this is the default. Note that this program will not
render the DSD audio. You need a DSD capable device to play DSD
content or this program will exit with an error.
--media-type=VALUE
Set the media type property (default Audio/Midi depending on mode).
The media type is used by the session manager to select a suitable
target to link to.
--media-category=VALUE
Set the media category property (default Playback/Capture depending
on mode). The media type is used by the session manager to select a
suitable target to link to.
--media-role=VALUE
Set the media role property (default Music). The media type is used
by the session manager to select a suitable target to link to.
--target=VALUE
Set a node target (default auto). The value can be:
• auto: Automatically select (Default)
• 0: Don't try to link this node
• <id>: The object.serial or the node.name of a target node
--latency=VALUE[units]
Set the node latency (default 100ms)
The latency determines the minimum amount of time it takes for a
sample to travel from application to device (playback) and from
device to application (capture).
The latency determines the size of the buffers that the application
will be able to fill. Lower latency means smaller buffers but higher
overhead. Higher latency means larger buffers and lower overhead.
Units can be s for seconds, ms for milliseconds, us for
microseconds, ns for nanoseconds. If no units are given, the latency
value is samples with the samplerate of the file.
-P | --properties=VALUE
Set extra stream properties as a JSON object.
-q | --quality=VALUE
Resampler quality. When the samplerate of the source or destination
file does not match the samplerate of the server, the data will be
resampled. Higher quality uses more CPU. Values between 0 and 15 are
allowed, the default quality is 4.
--rate=VALUE
The sample rate, default 48000.
--channels=VALUE
The number of channels, default 2.
--channel-map=VALUE
The channelmap. Possible values include: mono, stereo, surround-21,
quad, surround-22, surround-40, surround-31, surround-41,
surround-50, surround-51, surround-51r, surround-70, surround-71 or
a comma separated list of channel names: FL, FR, FC, LFE, SL, SR,
FLC, FRC, RC, RL, RR, TC, TFL, TFC, TFR, TRL, TRC, TRR, RLC, RRC,
FLW, FRW, LFE2, FLH, FCH, FRH, TFLC, TFRC, TSL, TSR, LLFR, RLFE, BC,
BLC, BRC
--format=VALUE
The sample format to use. One of: u8, s8, s16 (default), s24, s32,
f32, f64.
--volume=VALUE
The stream volume, default 1.000. Depending on the locale you have
configured, ',' or '.' may be used as a decimal separator. Check
with locale command.
AUTHORS
The PipeWire Developers
<https://gitlab.freedesktop.org/pipewire/pipewire/issues>; PipeWire is
available from <https://pipewire.org>
SEE ALSO
pipewire(1), pw-mon(1),
PipeWire 1.4.2 pw-cat(1)
Generated by dwww version 1.16 on Sat Oct 3 06:02:19 CEST 2026.