dwww Home | Manual pages | Find package

sane-ricoh(5)             SANE Scanner Access Now Easy            sane-ricoh(5)

NAME
       sane-ricoh - SANE backend for Ricoh flatbed scanners

DESCRIPTION
       The sane-ricoh library implements a SANE (Scanner Access Now Easy) back-
       end that provides access to the following Ricoh flatbed scanners:

              IS50
              IS60

DEVICE NAMES
       This backend expects device names of the form:

              special

       Where  special  is the path-name for the special device that corresponds
       to a SCSI scanner. The special device name must be a generic SCSI device
       or a symlink to such a device.  The program  sane-find-scanner(1)  helps
       to find out the correct device. Under Linux, such a device name could be
       /dev/sga or /dev/sge, for example.  See sane-scsi(5) for details.

FILES
       /etc/sane.d/ricoh.conf
              The backend configuration file (see also description of SANE_CON-
              FIG_DIR below).

       /usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.a
              The static library implementing this backend.

       /usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so
              The  shared library implementing this backend (present on systems
              that support dynamic loading).

ENVIRONMENT
       SANE_CONFIG_DIR
              This environment variable specifies the list of directories  that
              may  contain the configuration file.  On *NIX systems, the direc-
              tories are separated by a colon (`:'), under OS/2, they are sepa-
              rated by a semi-colon (`;').  If this variable is  not  set,  the
              configuration file is searched in two default directories: first,
              the  current working directory (".") and then in /etc/sane.d.  If
              the value of the environment variable  ends  with  the  directory
              separator  character,  then  the default directories are searched
              after the explicitly specified directories.  For example, setting
              SANE_CONFIG_DIR to "/tmp/config:"  would  result  in  directories
              tmp/config, ., and /etc/sane.d being searched (in this order).

       SANE_DEBUG_RICOH
              If  the library was compiled with debug support enabled, this en-
              vironment variable controls the debug  level  for  this  backend.
              Higher debug levels increase the verbosity of the output.

              Example: export SANE_DEBUG_RICOH=4

SEE ALSO
       sane(7), sane-scsi(5), sane-find-scanner(1)

AUTHOR
       Feico W. Dillema

                                  14 Jul 2008                     sane-ricoh(5)

Generated by dwww version 1.16 on Sat Oct 3 06:27:02 CEST 2026.