sane-sm3840(5) SANE Scanner Access Now Easy sane-sm3840(5)
NAME
sane-sm3840 - SANE backend for Microtek scanners with SCAN08 USB chip
DESCRIPTION
The sane-sm3840 library implements a SANE (Scanner Access Now Easy)
backend that provides access to some Microtek scanners with the SCAN08
USB chip.
There exist backends for Microtek scanners with SCSI command set. Refer
to sane-microtek(5) and sane-microtek2(5) for details.
There also exists a Microtek 3600 series driver, see sane-sm3600(5) for
details.
At present, the following scanners are known positively to work with
this backend:
Vendor Product ID: Remark:
-------- -------------- -----------
Microtek ScanMaker 3840 All modes OK
Microtek ScanMaker 4800 All modes OK
If you own a Microtek scanner with the SCAN08 chip other than the ones
listed above, it may or may not work with SANE. Feel free to contact
the backend author (earle@ziplabel.com) to report results with scanners
not on the list.
FRONTEND OPTIONS
The following options are supported by the sane-sm3840 driver:
--mode color|gray|lineart|halftone
Color or grayscale mode.
--resolution 150|300|600|1200
Pixels per inch for scans.
--depth 8|16
Note that the least significant bits of 16bpp mode may be noise.
--brightness 1..4096
Higher numbers increase brightness of returned image.
--contrast 0.1..9.9
Larger numbers decrease contrast of returned image.
--lamp-timeout 1..15
Time in minutes until the lamp is turned off after a scan.
CONFIGURATION
This backend does not support a configuration file right now.
FILES
/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.a
The static library implementing this backend.
/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so
The shared library implementing this backend (present on systems
that support dynamic loading).
ENVIRONMENT
SANE_DEBUG_SM3840
If the library was compiled with debug support enabled, this en-
vironment variable controls the debug level for this backend.
E.g., a value of 128 requests all debug output to be printed.
Smaller levels reduce verbosity. To see error messages on stderr
set SANE_DEBUG_SM3840 to 1.
SEE ALSO
sane(7), sane-microtek(5), sane-microtek2(5), sane-sm3600(5)
http://www.ziplabel.com/sm3840
AUTHOR
Earle F. Philhower III <earle@ziplabel.com>
11 Jul 2008 sane-sm3840(5)
Generated by dwww version 1.16 on Sat Oct 3 06:26:47 CEST 2026.