TURBOSTAT(8) System Manager's Manual TURBOSTAT(8)
NAME
turbostat - Report processor frequency and idle statistics
SYNOPSIS
turbostat [Options] command
turbostat [Options] [--interval seconds]
DESCRIPTION
turbostat reports processor topology, frequency, idle power-state sta-
tistics, temperature and power on X86 processors. There are two ways to
invoke turbostat. The first method is to supply a command, which is
forked and statistics are printed in one-shot upon its completion. The
second method is to omit the command, and turbostat displays statistics
every 5 seconds interval. The 5-second interval can be changed using
the --interval option.
Some information is not available on older processors.
Options
Options can be specified with a single or double '-', and only as much
of the option name as necessary to disambiguate it from others is neces-
sary. Note that options are case-sensitive.
--add attributes add column with counter having specified 'attributes'.
The 'location' attribute is required, all others are optional.
location: {msrDDD | msr0xXXX | /sys/path... | perf/<device>/<event>}
msrDDD is a decimal offset, eg. msr16
msr0xXXX is a hex offset, eg. msr0x10
/sys/path... is an absolute path to a sysfs attribute
<device> is a perf device from /sys/bus/event_source/devices/<device> eg. cstate_core
On Intel hybrid platforms, instead of one "cpu" perf device there are two, "cpu_core" and "cpu_atom" devices for P and E cores respectively.
Turbostat, in this case, allow user to use "cpu" device and will automatically detect the type of a CPU and translate it to "cpu_core" and "cpu_atom" accordingly.
For a complete example see "ADD PERF COUNTER EXAMPLE #2 (using virtual "cpu" device)".
<event> is a perf event for given device from /sys/bus/event_source/devices/<device>/events/<event> eg. c1-residency
perf/cstate_core/c1-residency would then use /sys/bus/event_source/devices/cstate_core/events/c1-residency
scope: {cpu | core | package}
sample and print the counter for every cpu, core, or package.
default: cpu
size: {u32 | u64 }
MSRs are read as 64-bits, u32 truncates the displayed value to 32-bits.
default: u64
format: {raw | delta | percent}
'raw' shows the MSR contents in hex.
'delta' shows the difference in values during the measurement interval.
'percent' shows the delta as a percentage of the cycles elapsed.
default: delta
name: "name_string"
Any string that does not match a key-word above is used
as the column header.
--add pmt,[attr_name=attr_value, ...] add column with a PMT (Intel Plat-
form Monitoring Technology) counter in a similar way to --add option
above, but require PMT metadata to be supplied to correctly read and
display the counter. The metadata can be found in the Intel PMT XML
files, hosted at https://github.com/intel/Intel-PMT. For a complete ex-
ample see "ADD PMT COUNTER EXAMPLE".
name="name_string"
For column header.
type={raw}
'raw' shows the counter contents in hex.
default: raw
format={raw | delta}
'raw' shows the counter contents in hex.
'delta' shows the difference in values during the measurement interval.
default: raw
domain={cpu%u | core%u | package%u}
'cpu' per cpu/thread counter.
'core' per core counter.
'package' per package counter.
'%u' denotes id of the domain that the counter is associated with. For example core4 would mean that the counter is associated with core number 4.
offset=%u
'%u' offset within the PMT MMIO region.
lsb=%u
'%u' least significant bit within the 64 bit value read from 'offset'. Together with 'msb', used to form a read mask.
msb=%u
'%u' most significant bit within the 64 bit value read from 'offset'. Together with 'lsb', used to form a read mask.
guid=%x
'%x' hex identifier of the PMT MMIO region.
--cpu cpu-set limit output to system summary plus the specified cpu-set.
If cpu-set is the string "core", then the system summary plus the first
CPU in each core are printed -- eg. subsequent HT siblings are not
printed. Or if cpu-set is the string "package", then the system summary
plus the first CPU in each package is printed. Otherwise, the system
summary plus the specified set of CPUs are printed. The cpu-set is or-
dered from low to high, comma delimited with ".." and "-" permitted to
denote a range. eg. 1,2,8,14..17,21-44
--hide column do not show the specified built-in columns. May be in-
voked multiple times, or with a comma-separated list of column names.
--enable column show the specified built-in columns, which are otherwise
disabled, by default. Currently the only built-in counters disabled by
default are "usec", "Time_Of_Day_Seconds", "APIC" and "X2APIC". The
column name "all" can be used to enable all disabled-by-default built-in
counters.
--show column show only the specified built-in columns. May be invoked
multiple times, or with a comma-separated list of column names.
--show CATEGORY --hide CATEGORY Show and hide also accept a single CAT-
EGORY of columns: "all", "topology", "idle", "frequency", "power",
"sysfs", "other".
--Dump displays the raw counter values.
--quiet Do not decode and print the system configuration header informa-
tion.
--no-msr Disable all the uses of the MSR driver.
--no-perf Disable all the uses of the perf API.
--interval seconds overrides the default 5.0 second measurement inter-
val.
--num_iterations num number of the measurement iterations.
--out output_file turbostat output is written to the specified out-
put_file. The file is truncated if it already exists, and it is created
if it does not exist.
--help displays usage for the most common parameters.
--Joules displays energy in Joules, rather than dividing Joules by time
to print power in Watts.
--list display column header names available for use by --show and
--hide, then exit.
--Summary limits output to a 1-line System Summary for each interval.
--TCC temperature sets the Thermal Control Circuit temperature for sys-
tems which do not export that value. This is used for making sense of
the Digital Thermal Sensor outputs, as they return degrees Celsius below
the TCC activation temperature.
--version displays the version.
The command parameter forks command, and upon its exit, displays the
statistics gathered since it was forked.
ROW DESCRIPTIONS
The system configuration dump (if --quiet is not used) is followed by
statistics. The first row of the statistics labels the content of each
column (below). The second row of statistics is the system summary
line. The system summary line has a '-' in the columns for the Package,
Core, and CPU. The contents of the system summary line depends on the
type of column. Columns that count items (eg. IRQ) show the sum across
all CPUs in the system. Columns that show a percentage show the average
across all CPUs in the system. Columns that dump raw MSR values simply
show 0 in the summary. After the system summary row, each row describes
a specific Package/Core/CPU. Note that if the --cpu parameter is used
to limit which specific CPUs are displayed, turbostat will still collect
statistics for all CPUs in the system and will still show the system
summary for all CPUs in the system.
COLUMN DESCRIPTIONS
usec For each CPU, the number of microseconds elapsed during counter
collection, including thread migration -- if any. This counter is dis-
abled by default, and is enabled with "--enable usec", or --debug. On
the summary row, usec refers to the total elapsed time to collect the
counters on all cpus.
Time_Of_Day_Seconds For each CPU, the gettimeofday(2) value (sec-
onds.subsec since Epoch) when the counters ending the measurement inter-
val were collected. This column is disabled by default, and can be en-
abled with "--enable Time_Of_Day_Seconds" or "--debug". On the summary
row, Time_Of_Day_Seconds refers to the timestamp following collection of
counters on the last CPU.
Core processor core number. Note that multiple CPUs per core indicate
support for Intel(R) Hyper-Threading Technology (HT).
CPU Linux CPU (logical processor) number. Yes, it is okay that on many
systems the CPUs are not listed in numerical order -- for efficiency
reasons, turbostat runs in topology order, so HT siblings appear to-
gether.
Package processor package number -- not present on systems with a single
processor package.
Avg_MHz number of cycles executed divided by time elapsed. Note that
this includes idle-time when 0 instructions are executed.
Busy% percent of the measurement interval that the CPU executes instruc-
tions, aka. % of time in "C0" state.
Bzy_MHz average clock rate while the CPU was not idle (ie. in "c0"
state).
TSC_MHz average MHz that the TSC ran during the entire interval.
IRQ The number of interrupts serviced by that CPU during the measurement
interval. The system total line is the sum of interrupts serviced
across all CPUs. turbostat parses /proc/interrupts to generate this
summary.
SMI The number of System Management Interrupts serviced CPU during the
measurement interval. While this counter is actually per-CPU, SMI are
triggered on all processors, so the number should be the same for all
CPUs.
C1, C2, C3... The number times Linux requested the C1, C2, C3 idle state
during the measurement interval. The system summary line shows the sum
for all CPUs. These are C-state names as exported in /sys/devices/sys-
tem/cpu/cpu*/cpuidle/state*/name. While their names are generic, their
attributes are processor specific. They the system description section
of output shows what MWAIT sub-states they are mapped to on each system.
C1%, C2%, C3% The residency percentage that Linux requested C1, C2,
C3.... The system summary is the average of all CPUs in the system.
Note that these are software, reflecting what was requested. The hard-
ware counters reflect what was actually achieved.
CPU%c1, CPU%c3, CPU%c6, CPU%c7 show the percentage residency in hardware
core idle states. These numbers are from hardware residency counters.
CoreTmp Degrees Celsius reported by the per-core Digital Thermal Sensor.
PkgTmp Degrees Celsius reported by the per-package Package Thermal Moni-
tor.
CoreThr Core Thermal Throttling events during the measurement interval.
Note that events since boot can be find in /sys/devices/sys-
tem/cpu/cpu*/thermal_throttle/*
GFX%rc6 The percentage of time the GPU is in the "render C6" state, rc6,
during the measurement interval. From
/sys/class/drm/card0/power/rc6_residency_ms or
/sys/class/drm/card0/gt/gt0/rc6_residency_ms or /sys/class/drm/card0/de-
vice/tile0/gtN/gtidle/idle_residency_ms depending on the graphics driver
being used.
GFXMHz Instantaneous snapshot of what sysfs presents at the end of the
measurement interval. From /sys/class/graphics/fb0/de-
vice/drm/card0/gt_cur_freq_mhz or /sys/class/drm/card0/gt_cur_freq_mhz
or /sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz or
/sys/class/drm/card0/device/tile0/gtN/freq0/cur_freq depending on the
graphics driver being used.
GFXAMHz Instantaneous snapshot of what sysfs presents at the end of the
measurement interval. From /sys/class/graphics/fb0/de-
vice/drm/card0/gt_act_freq_mhz or /sys/class/drm/card0/gt_act_freq_mhz
or /sys/class/drm/card0/gt/gt0/rps_act_freq_mhz or
/sys/class/drm/card0/device/tile0/gtN/freq0/act_freq depending on the
graphics driver being used.
SAM%mc6 The percentage of time the SA Media is in the "module C6" state,
mc6, during the measurement interval. From
/sys/class/drm/card0/gt/gt1/rc6_residency_ms or /sys/class/drm/card0/de-
vice/tile0/gtN/gtidle/idle_residency_ms depending on the graphics driver
being used.
SAMMHz Instantaneous snapshot of what sysfs presents at the end of the
measurement interval. From /sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz
or /sys/class/drm/card0/device/tile0/gtN/freq0/cur_freq depending on the
graphics driver being used.
SAMAMHz Instantaneous snapshot of what sysfs presents at the end of the
measurement interval. From /sys/class/drm/card0/gt/gt1/rps_act_freq_mhz
or /sys/class/drm/card0/device/tile0/gtN/freq0/act_freq depending on the
graphics driver being used.
Pkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7 percentage residency in hardware
package idle states. These numbers are from hardware residency coun-
ters.
PkgWatt Watts consumed by the whole package.
CorWatt Watts consumed by the core part of the package.
GFXWatt Watts consumed by the Graphics part of the package -- available
only on client processors.
RAMWatt Watts consumed by the DRAM DIMMS -- available only on server
processors.
PKG_% percent of the interval that RAPL throttling was active on the
Package. Note that the system summary is the sum of the package throt-
tling time, and thus may be higher than 100% on a multi-package system.
Note that the meaning of this field is model specific. For example,
some hardware increments this counter when RAPL responds to thermal lim-
its, but does not increment this counter when RAPL responds to power
limits. Comparing PkgWatt and PkgTmp to system limits is necessary.
RAM_% percent of the interval that RAPL throttling was active on DRAM.
UncMHz per-package uncore MHz, instantaneous sample.
UMHz1.0 per-package uncore MHz for domain=1 and fabric_cluster=0, in-
stantaneous sample. System summary is the average of all packages. For
the "--show" and "--hide" options, use "UncMHz" to operate on all
UMHz*.* as a group.
TOO MUCH INFORMATION EXAMPLE
By default, turbostat dumps all possible information -- a system config-
uration header, followed by columns for all counters. This is ideal for
remote debugging, use the "--out" option to save everything to a text
file, and get that file to the expert helping you debug.
When you are not interested in all that information, and there are sev-
eral ways to see only what you want. First the "--quiet" option will
skip the configuration information, and turbostat will show only the
counter columns. Second, you can reduce the columns with the "--hide"
and "--show" options. If you use the "--show" option, then turbostat
will show only the columns you list. If you use the "--hide" option,
turbostat will show all columns, except the ones you list.
To find out what columns are available for --show and --hide, the
"--list" option is available. Usually, the CATEGORY names above are
used to refer to groups of counters. Also, for convenience, the special
string "sysfs" can be used to refer to all of the sysfs C-state counters
at once:
sudo ./turbostat --show sysfs --quiet sleep 10
10.003837 sec
C1 C1E C3 C6 C7s C1% C1E% C3% C6% C7s%
4 21 2 2 459 0.14 0.82 0.00 0.00 98.93
1 17 2 2 130 0.00 0.02 0.00 0.00 99.80
0 0 0 0 31 0.00 0.00 0.00 0.00 99.95
2 1 0 0 52 1.14 6.49 0.00 0.00 92.21
1 2 0 0 52 0.00 0.08 0.00 0.00 99.86
0 0 0 0 71 0.00 0.00 0.00 0.00 99.89
0 0 0 0 25 0.00 0.00 0.00 0.00 99.96
0 0 0 0 74 0.00 0.00 0.00 0.00 99.94
0 1 0 0 24 0.00 0.00 0.00 0.00 99.84
ONE SHOT COMMAND EXAMPLE
If turbostat is invoked with a command, it will fork that command and
output the statistics gathered after the command exits. In this case,
turbostat output goes to stderr, by default. Output can instead be
saved to a file using the --out option. In this example, the "sleep 10"
command is forked, and turbostat waits for it to complete before saving
all statistics into "ts.out". Note that "sleep 10" is not part of tur-
bostat, but is simply an example of a command that turbostat can fork.
The "ts.out" file is what you want to edit in a very wide window, paste
into a spreadsheet, or attach to a bugzilla entry.
[root@hsw]# ./turbostat -o ts.out sleep 10
[root@hsw]#
PERIODIC INTERVAL EXAMPLE
Without a command to fork, turbostat displays statistics ever 5 seconds.
Periodic output goes to stdout, by default, unless --out is used to
specify an output file. The 5-second interval can be changed with the
"-i sec" option.
sudo turbostat --quiet --show CPU,frequency
Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c7 UncMhz
- - 524 12.48 4198 3096 74.53 3800
0 0 4 0.09 4081 3096 98.88 3800
0 4 1 0.02 4063 3096
1 1 2 0.06 4063 3096 99.60
1 5 2 0.05 4070 3096
2 2 4178 99.52 4199 3096 0.00
2 6 3 0.08 4159 3096
3 3 1 0.04 4046 3096 99.66
3 7 0 0.01 3989 3096
Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c7 UncMhz
- - 525 12.52 4198 3096 74.54 3800
0 0 4 0.10 4051 3096 99.49 3800
0 4 2 0.04 3993 3096
1 1 3 0.07 4054 3096 99.56
1 5 4 0.10 4018 3096
2 2 4178 99.51 4199 3096 0.00
2 6 4 0.09 4143 3096
3 3 2 0.06 4026 3096 99.10
3 7 7 0.17 4074 3096
This example also shows the use of the --show option to show only the
desired columns.
SYSTEM CONFIGURATION INFORMATION EXAMPLE
By default, turbostat always dumps system configuration information be-
fore taking measurements. In the example above, "--quiet" is used to
suppress that output. Here is an example of the configuration informa-
tion:
turbostat version 2022.04.16 - Len Brown <lenb@kernel.org>
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.18.0-rc6-00001-ge6891250e3b5 ...
CPUID(0): GenuineIntel 0x16 CPUID levels
CPUID(1): family:model:stepping 0x6:9e:9 (6:158:9) microcode 0xea
CPUID(0x80000000): max_extended_levels: 0x80000008
CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM HT TM
CPUID(6): APERF, TURBO, DTS, PTM, HWP, HWPnotify, HWPwindow, HWPepp, No-HWPpkg, EPB
cpu7: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MWAIT PREFETCH TURBO)
CPUID(7): SGX
cpu7: MSR_IA32_FEATURE_CONTROL: 0x00000005 (Locked )
CPUID(0x15): eax_crystal: 2 ebx_tsc: 258 ecx_crystal_hz: 0
TSC: 3096 MHz (24000000 Hz * 258 / 2 / 1000000)
CPUID(0x16): base_mhz: 3100 max_mhz: 4200 bus_mhz: 100
cpu7: MSR_MISC_PWR_MGMT: 0x00401cc0 (ENable-EIST_Coordination DISable-EPB DISable-OOB)
RAPL: 5825 sec. Joule Counter Range, at 45 Watts
cpu7: MSR_PLATFORM_INFO: 0x80839f1011f00
8 * 100.0 = 800.0 MHz max efficiency frequency
31 * 100.0 = 3100.0 MHz base frequency
cpu7: MSR_IA32_POWER_CTL: 0x002c005d (C1E auto-promotion: DISabled)
cpu7: MSR_TURBO_RATIO_LIMIT: 0x2728292a
39 * 100.0 = 3900.0 MHz max turbo 4 active cores
40 * 100.0 = 4000.0 MHz max turbo 3 active cores
41 * 100.0 = 4100.0 MHz max turbo 2 active cores
42 * 100.0 = 4200.0 MHz max turbo 1 active cores
cpu7: MSR_CONFIG_TDP_NOMINAL: 0x0000001f (base_ratio=31)
cpu7: MSR_CONFIG_TDP_LEVEL_1: 0x00000000 ()
cpu7: MSR_CONFIG_TDP_LEVEL_2: 0x00000000 ()
cpu7: MSR_CONFIG_TDP_CONTROL: 0x80000000 ( lock=1)
cpu7: MSR_TURBO_ACTIVATION_RATIO: 0x00000000 (MAX_NON_TURBO_RATIO=0 lock=0)
cpu7: MSR_PKG_CST_CONFIG_CONTROL: 0x1e008008 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, locked, pkg-cstate-limit=8 (unlimited))
Uncore Frequency pkg0 die0: 800 - 3900 MHz (800 - 3900 MHz)
/dev/cpu_dma_latency: 2000000000 usec (default)
current_driver: intel_idle
current_governor: menu
current_governor_ro: menu
cpu7: POLL: CPUIDLE CORE POLL IDLE
cpu7: C1: MWAIT 0x00
cpu7: C1E: MWAIT 0x01
cpu7: C3: MWAIT 0x10
cpu7: C6: MWAIT 0x20
cpu7: C7s: MWAIT 0x33
cpu7: C8: MWAIT 0x40
cpu7: C9: MWAIT 0x50
cpu7: C10: MWAIT 0x60
cpu7: cpufreq driver: intel_pstate
cpu7: cpufreq governor: performance
cpufreq intel_pstate no_turbo: 0
cpu7: MSR_MISC_FEATURE_CONTROL: 0x00000000 (L2-Prefetch L2-Prefetch-pair L1-Prefetch L1-IP-Prefetch)
cpu0: MSR_PM_ENABLE: 0x00000001 (HWP)
cpu0: MSR_HWP_CAPABILITIES: 0x01101f53 (high 83 guar 31 eff 16 low 1)
cpu0: MSR_HWP_REQUEST: 0x00005353 (min 83 max 83 des 0 epp 0x0 window 0x0 pkg 0x0)
cpu0: MSR_HWP_INTERRUPT: 0x00000001 (EN_Guaranteed_Perf_Change, Dis_Excursion_Min)
cpu0: MSR_HWP_STATUS: 0x00000004 (No-Guaranteed_Perf_Change, No-Excursion_Min)
cpu0: EPB: 6 (balanced)
cpu0: MSR_RAPL_POWER_UNIT: 0x000a0e03 (0.125000 Watts, 0.000061 Joules, 0.000977 sec.)
cpu0: MSR_PKG_POWER_INFO: 0x00000168 (45 W TDP, RAPL 0 - 0 W, 0.000000 sec.)
cpu0: MSR_PKG_POWER_LIMIT: 0x42820800218208 (UNlocked)
cpu0: PKG Limit #1: ENabled (65.000 Watts, 64.000000 sec, clamp ENabled)
cpu0: PKG Limit #2: ENabled (65.000 Watts, 0.002441* sec, clamp DISabled)
cpu0: MSR_VR_CURRENT_CONFIG: 0x00000000
cpu0: PKG Limit #4: 0.000000 Watts (UNlocked)
cpu0: MSR_DRAM_POWER_LIMIT: 0x5400de00000000 (UNlocked)
cpu0: DRAM Limit: DISabled (0.000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_PP0_POLICY: 0
cpu0: MSR_PP0_POWER_LIMIT: 0x00000000 (UNlocked)
cpu0: Cores Limit: DISabled (0.000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_PP1_POLICY: 0
cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked)
cpu0: GFX Limit: DISabled (0.000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00640000 (100 C) (100 default - 0 offset)
cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x88200800 (68 C)
cpu0: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C)
cpu7: MSR_PKGC3_IRTL: 0x0000884e (valid, 79872 ns)
cpu7: MSR_PKGC6_IRTL: 0x00008876 (valid, 120832 ns)
cpu7: MSR_PKGC7_IRTL: 0x00008894 (valid, 151552 ns)
cpu7: MSR_PKGC8_IRTL: 0x000088fa (valid, 256000 ns)
cpu7: MSR_PKGC9_IRTL: 0x0000894c (valid, 339968 ns)
cpu7: MSR_PKGC10_IRTL: 0x00008bf2 (valid, 1034240 ns)
The max efficiency frequency, a.k.a. Low Frequency Mode, is the fre-
quency available at the minimum package voltage. The TSC frequency is
the base frequency of the processor -- this should match the brand
string in /proc/cpuinfo. This base frequency should be sustainable on
all CPUs indefinitely, given nominal power and cooling. The remaining
rows show what maximum turbo frequency is possible depending on the num-
ber of idle cores. Note that not all information is available on all
processors.
ADD COUNTER EXAMPLE
Here we limit turbostat to showing just the CPU number for cpu0 - cpu3.
We add a counter showing the 32-bit raw value of MSR 0x199
(MSR_IA32_PERF_CTL), labeling it with the column header, "PRF_CTRL", and
display it only once, after the conclusion of a 0.1 second sleep.
sudo ./turbostat --quiet --cpu 0-3 --show CPU --add msr0x199,u32,raw,PRF_CTRL sleep .1
0.101604 sec
CPU PRF_CTRL
- 0x00000000
0 0x00000c00
1 0x00000800
2 0x00000a00
3 0x00000800
ADD PERF COUNTER EXAMPLE
Here we limit turbostat to showing just the CPU number for cpu0 - cpu3.
We add a counter showing time spent in C1 core cstate, labeling it with
the column header, "pCPU%c1", and display it only once, after the con-
clusion of 0.1 second sleep. We also show CPU%c1 built-in counter that
should show similar values.
sudo ./turbostat --quiet --cpu 0-3 --show CPU,CPU%c1 --add perf/cstate_core/c1-residency,cpu,delta,percent,pCPU%c1 sleep .1
0.102448 sec
CPU pCPU%c1 CPU%c1
- 34.89 34.89
0 45.99 45.99
1 45.94 45.94
2 23.83 23.83
3 23.84 23.84
ADD PERF COUNTER EXAMPLE #2 (using virtual cpu device)
Here we run on hybrid, Raptor Lake platform. We limit turbostat to show
output for just cpu0 (pcore) and cpu12 (ecore). We add a counter show-
ing number of L3 cache misses, using virtual "cpu" device, labeling it
with the column header, "VCMISS". We add a counter showing number of L3
cache misses, using virtual "cpu_core" device, labeling it with the col-
umn header, "PCMISS". This will fail on ecore cpu12. We add a counter
showing number of L3 cache misses, using virtual "cpu_atom" device, la-
beling it with the column header, "ECMISS". This will fail on pcore
cpu0. We display it only once, after the conclusion of 0.1 second
sleep.
sudo ./turbostat --quiet --cpu 0,12 --show CPU --add perf/cpu/cache-misses,cpu,delta,raw,VCMISS --add perf/cpu_core/cache-misses,cpu,delta,raw,PCMISS --add perf/cpu_atom/cache-misses,cpu,delta,raw,ECMISS sleep .1
turbostat: added_perf_counters_init_: perf/cpu_atom/cache-misses: failed to open counter on cpu0
turbostat: added_perf_counters_init_: perf/cpu_core/cache-misses: failed to open counter on cpu12
0.104630 sec
CPU ECMISS PCMISS VCMISS
- 0x0000000000000000 0x0000000000000000 0x0000000000000000
0 0x0000000000000000 0x0000000000007951 0x0000000000007796
12 0x000000000001137a 0x0000000000000000 0x0000000000011392
ADD PMT COUNTER EXAMPLE
Here we limit turbostat to showing just the CPU number 0. We add two
counters, showing crystal clock count and the DC6 residency. All the
parameters passed are based on the metadata found in the PMT XML files.
For the crystal clock count, we label it with the column header, "XTAL",
we set the type to 'raw', to read the number of clock ticks in hex, we
set the format to 'delta', to display the difference in ticks during the
measurement interval, we set the domain to 'package0', to collect it and
associate it with the whole package number 0, we set the offset to '0',
which is a offset of the counter within the PMT MMIO region, we set the
lsb and msb to cover all 64 bits of the read 64 bit value, and finally
we set the guid to '0x1a067102', that identifies the PMT MMIO region to
which the 'offset' is applied to read the counter value.
For the DC6 residency counter, we label it with the column header,
"Die%c6", we set the type to 'txtal_time', to obtain the percent resi-
dency value we set the format to 'delta', to display the difference in
ticks during the measurement interval, we set the domain to 'package0',
to collect it and associate it with the whole package number 0, we set
the offset to '0', which is a offset of the counter within the PMT MMIO
region, we set the lsb and msb to cover all 64 bits of the read 64 bit
value, and finally we set the guid to '0x1a067102', that identifies the
PMT MMIO region to which the 'offset' is applied to read the counter
value.
sudo ./turbostat --quiet --cpu 0 --show CPU --add pmt,name=XTAL,type=raw,format=delta,domain=package0,offset=0,lsb=0,msb=63,guid=0x1a067102 --add pmt,name=Die%c6,type=txtal_time,format=delta,domain=package0,offset=120,lsb=0,msb=63,guid=0x1a067102
0.104352 sec
CPU XTAL Die%c6
- 0x0000006d4d957ca7 0.00
0 0x0000006d4d957ca7 0.00
0.102448 sec
INPUT
For interval-mode, turbostat will immediately end the current interval
when it sees a newline on standard input. turbostat will then start the
next interval. Control-C will be send a SIGINT to turbostat, which will
immediately abort the program with no further processing.
SIGNALS
SIGINT will interrupt interval-mode. The end-of-interval data will be
collected and displayed before turbostat exits.
SIGUSR1 will end current interval, end-of-interval data will be col-
lected and displayed before turbostat starts a new interval.
NOTES
turbostat must be run as root. Alternatively, non-root users can be en-
abled to run turbostat this way:
# setcap cap_sys_admin,cap_sys_rawio,cap_sys_nice=+ep path/to/turbostat
# chmod +r /dev/cpu/*/msr
# chmod +r /dev/cpu_dma_latency
turbostat reads hardware counters, but doesn't write them. So it will
not interfere with the OS or other programs, including multiple invoca-
tions of itself.
turbostat may work poorly on Linux-2.6.20 through 2.6.29, as acpi-
cpufreq periodically cleared the APERF and MPERF MSRs in those kernels.
AVG_MHz = APERF_delta/measurement_interval. This is the actual number
of elapsed cycles divided by the entire sample interval -- including
idle time. Note that this calculation is resilient to systems lacking a
non-stop TSC.
TSC_MHz = TSC_delta/measurement_interval. On a system with an invariant
TSC, this value will be constant and will closely match the base fre-
quency value shown in the brand string in /proc/cpuinfo. On a system
where the TSC stops in idle, TSC_MHz will drop below the processor's
base frequency.
Busy% = MPERF_delta/TSC_delta
Bzy_MHz = TSC_delta*APERF_delta/MPERF_delta/measurement_interval
Note that these calculations depend on TSC_delta, so they are not reli-
able during intervals when TSC_MHz is not running at the base frequency.
Turbostat data collection is not atomic. Extremely short measurement
intervals (much less than 1 second), or system activity that prevents
turbostat from being able to run on all CPUS to quickly collect data,
will result in inconsistent results.
The APERF, MPERF MSRs are defined to count non-halted cycles. Although
it is not guaranteed by the architecture, turbostat assumes that they
count at TSC rate, which is true on all processors tested to date.
REFERENCES
Volume 3B: System Programming Guide" https://www.intel.com/prod-
ucts/processor/manuals/
FILES
/dev/cpu/*/msr
SEE ALSO
msr(4), vmstat(8)
AUTHOR
Written by Len Brown <len.brown@intel.com>
TURBOSTAT(8)
Generated by dwww version 1.16 on Thu Nov 19 22:31:11 CET 2026.