ORG.FREEDESKTOP.IMPORT1(5) org.freedesktop.import1 ORG.FREEDESKTOP.IMPORT1(5)
NAME
org.freedesktop.import1 - The D-Bus interface of systemd-importd
INTRODUCTION
systemd-importd.service(8) is a system service which may be used to
import, export and download additional system images. These images can
be used by tools such as systemd-nspawn(1) to run local containers. The
service is used as the backend for machinectl pull-raw, machinectl
pull-tar and related commands. This page describes the D-Bus interface.
Note that systemd-importd.service(8) is mostly a small companion
service for systemd-machined.service(8). Many operations to manipulate
local container and VM images are hence available via the
systemd-machined D-Bus API, c.f. org.freedesktop.machine1(5).
THE MANAGER OBJECT
The service exposes the following interfaces on the Manager object on
the bus:
node /org/freedesktop/import1 {
interface org.freedesktop.import1.Manager {
methods:
ImportTar(in h fd,
in s local_name,
in b force,
in b read_only,
out u transfer_id,
out o transfer_path);
ImportRaw(in h fd,
in s local_name,
in b force,
in b read_only,
out u transfer_id,
out o transfer_path);
ImportFileSystem(in h fd,
in s local_name,
in b force,
in b read_only,
out u transfer_id,
out o transfer_path);
ExportTar(in s local_name,
in h fd,
in s format,
out u transfer_id,
out o transfer_path);
ExportRaw(in s local_name,
in h fd,
in s format,
out u transfer_id,
out o transfer_path);
PullTar(in s url,
in s local_name,
in s verify_mode,
in b force,
out u transfer_id,
out o transfer_path);
PullRaw(in s url,
in s local_name,
in s verify_mode,
in b force,
out u transfer_id,
out o transfer_path);
ListTransfers(out a(usssdo) transfers);
CancelTransfer(in u transfer_id);
signals:
TransferNew(u transfer_id,
o transfer_path);
TransferRemoved(u transfer_id,
o transfer_path,
s result);
};
interface org.freedesktop.DBus.Peer { ... };
interface org.freedesktop.DBus.Introspectable { ... };
interface org.freedesktop.DBus.Properties { ... };
};
Methods
ImportTar() and ImportRaw() import a system image and place it into
/var/lib/machines/. The first argument should be a file descriptor
(opened for reading) referring to the tar or raw file to import. It
should reference a file on disk, a pipe or a socket. When ImportTar()
is used the file descriptor should refer to a tar file, optionally
compressed with gzip(1), bzip2(1), or xz(1). systemd-importd will
detect the used compression scheme (if any) automatically. When
ImportRaw() is used the file descriptor should refer to a raw or qcow2
disk image containing an MBR or GPT disk label, also optionally
compressed with gzip, bzip2 or xz. In either case, if the file is
specified as a file descriptor on disk, progress information is
generated for the import operation (as in that case we know the total
size on disk). If a socket or pipe is specified, progress information
is not available. The file descriptor argument is followed by a local
name for the image. This should be a name suitable as a hostname and
will be used to name the imported image below /var/lib/machines/. A tar
import is placed as a directory tree or a btrfs(8) subvolume below
/var/lib/machines/ under the specified name with no suffix appended. A
raw import is placed as a file in /var/lib/machines/ with the .raw
suffix appended. If the force argument is true, any pre-existing image
with the same name is removed before starting the operation. Otherwise,
the operation fails if an image with the same name already exists.
Finally, the read_only argument controls whether to create a writable
or read-only image. Both methods return immediately after starting the
import, with the import transfer ongoing. They return a pair of
transfer identifier and object path, which may be used to retrieve
progress information about the transfer or to cancel it. The transfer
identifier is a simple numeric identifier, the object path references
an org.freedesktop.import1.Transfer object, see below. Listen for a
TransferRemoved signal for the transfer ID in order to detect when a
transfer is complete. The returned transfer object is useful to
determine the current progress or log output of the ongoing import
operation.
ExportTar() and ExportRaw() implement the reverse operation, and may be
used to export a system image in order to place it in a tar or raw
image. They take the machine name to export as their first parameter,
followed by a file descriptor (opened for writing) where the tar or raw
file will be written. It may either reference a file on disk or a
pipe/socket. The third argument specifies in which compression format
to write the image. It takes one of "uncompressed", "xz", "bzip2" or
"gzip", depending on which compression scheme is required. The image
written to the specified file descriptor will be a tar file in case of
ExportTar() or a raw disk image in case of ExportRaw(). Note that
currently raw disk images may not be exported as tar files, and vice
versa. This restriction might be lifted eventually. The method returns
a transfer identifier and object path for cancelling or tracking the
export operation, similar to ImportTar() or ImportRaw() as described
above.
PullTar() and PullRaw() may be used to download, verify and import a
system image from a URL. They take an URL argument which should point
to a tar or raw file on the "http://" or "https://" protocols, possibly
compressed with xz, bzip2 or gzip. The second argument is a local name
for the image. It should be suitable as a hostname, similar to the
matching argument of the ImportTar() and ImportRaw() methods above. The
third argument indicates the verification mode for the image. It may be
one of "no", "checksum", "signature". "no" turns off any kind of
verification of the image; "checksum" looks for a SHA256SUM file next
to the downloaded image and verifies any SHA256 hash value in that file
against the image; "signature" does the same but also tries to
authenticate the SHA256SUM file via gpg(8) first. The last argument
indicates whether to replace a possibly pre-existing image with the
same local name (if "true"), or whether to fail (if "false"). Like the
import and export calls above, these calls return a pair of transfer
identifier and object path for the ongoing download.
ListTransfers() returns a list of ongoing import, export or download
operations as created with the six calls described above. It returns an
array of structures which consist of the numeric transfer identifier, a
string indicating the operation (one of "import-tar", "import-raw",
"export-tar", "export-raw", "pull-tar" or "pull-raw"), a string
describing the remote file (in case of download operations this is the
source URL, in case of import/export operations this is a short string
describing the file descriptor passed in), a string with the local
machine image name, a progress value between 0.0 (for 0%) and 1.0 (for
100%), as well as the transfer object path.
CancelTransfer() may be used to cancel an ongoing import, export or
download operation. Simply specify the transfer identifier to cancel
the ongoing operation.
Signals
The TransferNew signal is generated each time a new transfer is started
with the import, export or download calls described above. It carries
the transfer ID and object path that have just been created.
The TransferRemoved signal is sent each time a transfer finishes, is
canceled or fails. It also carries the transfer ID and object path,
followed by a string indicating the result of the operation, which is
one of "done" (on success), "canceled" or "failed".
THE TRANSFER OBJECT
node /org/freedesktop/import1/transfer/_1 {
interface org.freedesktop.import1.Transfer {
methods:
Cancel();
signals:
LogMessage(u priority,
s line);
properties:
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly u Id = ...;
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Local = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Remote = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Type = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Verify = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly d Progress = ...;
};
interface org.freedesktop.DBus.Peer { ... };
interface org.freedesktop.DBus.Introspectable { ... };
interface org.freedesktop.DBus.Properties { ... };
};
Methods
The Cancel() method may be used to cancel the transfer. It takes no
parameters. This method is pretty much equivalent to the
CancelTransfer() method on the Manager interface (see above), but is
exposed on the Transfer object itself instead of taking a transfer ID.
Properties
The Id property exposes the numeric transfer ID of the transfer object.
The Local, Remote and Type properties expose the local container name
of this transfer, the remote source (in case of download: the URL, in
case of import/export: a string describing the file descriptor passed
in), and the type of operation (see the Manager's ListTransfer() method
above for an explanation of the possible values).
The Verify property exposes the selected verification setting and is
only defined for download operations (see above).
The Progress property exposes the current progress of the transfer as a
value between 0.0 and 1.0. To show a progress bar on screen we
recommend to query this value in regular intervals, for example every
500 ms or so.
EXAMPLES
Example 1. Introspect org.freedesktop.import1.Manager on the bus
$ gdbus introspect --system \
--dest org.freedesktop.import1 \
--object-path /org/freedesktop/import1
Example 2. Introspect org.freedesktop.import1.Transfer on the bus
$ gdbus introspect --system \
--dest org.freedesktop.import1 \
--object-path /org/freedesktop/import1/transfer/_1
VERSIONING
These D-Bus interfaces follow the usual interface versioning
guidelines[1].
NOTES
1. the usual interface versioning guidelines
http://0pointer.de/blog/projects/versioning-dbus.html
systemd 249 ORG.FREEDESKTOP.IMPORT1(5)
Generated by dwww version 1.14 on Fri Dec 5 05:16:10 CET 2025.